What tools do you need to change oil?
In addition to oil, you’ll need an oil filter, an oil-filter removal wrench, a wrench to remove the drain plug, a funnel, a drain pan and some gloves. You may also need to raise the car to gain access, in which case you’ll need a floor jack and safety stands, or a pair of purpose-made steel ramps.
What size is the oil drain plug on a Honda Accord?
17mm
Dorman – Autograde – Oil Drain Plug Standard M14-1.50, Head Size 17mm (Part No. 090-033.1)
What type of oil does a 2004 Honda Accord take?
Mobil 1 Extended Performance Synthetic Motor Oil 5W-20 5 Quart.
What type of oil do you put in a 2004 Honda Accord?
Engine Oil
| Viscosity: | 5W-20 (All TEMPS) |
|---|---|
| Capacity: | 4.4 quarts (with filter)After refill check oil level. 4.2 quarts. w/ofAfter refill check oil level. |
| Torque: | 33 ft/lbs (Oil Drain Plug) |
How to prepare Honda Accord for oil change?
Step 1 – Prepare the Honda Accord for the oil change. Turn on your car to warm up the engine. This is vital because warm oil drains out more easily than cold oil. Run the engine for around ten minutes and shut it off. Put the car in park and engage the parking brake.
What’s the best way to keep your Honda Accord fresh?
Keeping the oil fresh will ensure a long life for the engine components in your Honda Accord. Turn on your car to warm up the engine. This is vital because warm oil drains out more easily than cold oil. Run the engine for around ten minutes and shut it off. Put the car in park and engage the parking brake.
Where is the oil filter on a Honda Accord?
The oil filter on a Honda Accord is located just aft and above the oil pan as shown in the following picture (orange). Use a 17mm wrench or socket ( nice socket set) to remove the drain plug. Have a drain pan ready as you loosen the drain plug.
Do you need to reset the maintenance light on a Honda Accord?
One last thing that I should mention is that Honda Accords will show a “Maintenance Required” Light when it thinks the oil should be changed. You will need to reset this light if it comes on after you have changed oil. Check out this article for the procedure to reset the light is pretty straightforward.
What kind of oil does a 2008 Volvo take?
The 2008 Volvo XC90 uses an SAE 5W-30 fully synthetic motor oil. This is the recommended motor oil for the car, as suggested by the manufacturer. It is always good practice to follow this recommendation.
How many quarts of oil does a 2008 Volvo xc90 take?
7.8 quarts
Engine Oil SAE 5W-30 is preferred. Capacity: 7.8 quarts (with filter)After refill check oil level.
What type of oil does a 2007 Volvo XC90 use?
Mobil 1 Advanced Synthetic Motor Oil 5W-30 5 Quart.
How do you change engine oil in a Volvo?
Remove the oil plug (17mm socket) and drain the engine oil (If you have drive the car before be caution, as it will be HOT) Step 5. While oil is draining, from the top of the car, with the 36mm socket remove the oil filter housing cover (located front of engine as marked in yellow in the image below) and replace the filter insert with the new one:
What kind of tools do I need to change my oil?
Tools Required: 1 Wrench to remove drain plug (box end or socket) 2 Oil filter wrench 3 Oil drain pan 4 Funnel 5 Latex gloves 6 Jack and jack stands or ramps (optional, depends on ground clearance)
What kind of oil do you put in a Volvo S80?
Car Displayed: 2008 Volvo C70 T5 2.5L 5 Cyl. Turbo 9. Add Oil – Determine the correct oil type and add oil 10. Replace Cap – Put the oil fill cap back on the engine Car Displayed: 2008 Volvo C70 T5 2.5L 5 Cyl.
What do I need to change my oil filter?
Get together your filter, wrenches, and other supplies. In addition to oil, you’ll need an oil filter, an oil-filter removal wrench, a wrench to remove the drain plug, a funnel, a drain pan and some gloves.