Where do I plug in my TCU hand held?
Plug the hand-held into the data communications cable and the power connector into a cigarette lighter to begin using the hand-held. When making your power and ground connections, you should always create a new connection and never tap into other sources for the TCU.
Where to install a TCU on a GM transmission?
It’s recommended to install the TCU away from any current-producing electrical components, such as your distributor or Ignition box, to keep EMI away from the control unit. All the plugs are in place, making the installation a breeze. When installing, make sure all wires are kept away from excessive heat.
Where are the connectors on the TCI harness?
Line the arrow on the TCI harness up with the notch on the case connector. 4L60E/4L65E -connector is located on the passenger side of the case. 4L80E – connector is located towards the rear of the driver side of the case.
How do you replace a transmission connector plug?
You may to remove the plastic cover to get to the connector. Remove the torx bolt at the bottom of the metal shield. Twist the connector down. Pull the cable out and see if there is oil at the pins. Remove the 7 mm bolt in the center of the famous connector.
You may to remove the plastic cover to get to the connector. Remove the torx bolt at the bottom of the metal shield. Twist the connector down. Pull the cable out and see if there is oil at the pins. Remove the 7 mm bolt in the center of the famous connector.
What kind of connectors do I need to make a harness?
The Muyi Weatherproof Connector has the ability to connect multiple wires together, which we find perfect for making custom harnesses. Top rated Based on star rating and number of customer ratingsSee more
Why is my transmission adapter plug not working?
This connector causes transmission oil leaks and also it gets so wet that the car TCU looses communication with the valve body. You may to remove the plastic cover to get to the connector. Remove the torx bolt at the bottom of the metal shield.
How does a TCU work on an EZ-TCU?
SPEEDOMETER CONTROL UNIT This connects to an optional TCI® Speedometer Control Unit (SCU). An SCU uses an electric motor to spin a special speedometer cable to drive a mechanical speedometer. 5 FAST™ 3400 Democrat Rd. Memphis, TN 38118 Phone: (901) 260-3278 Fax: (901) 366-1807 www.fuelairspark.com Part #CPG5-103 Revised 6…