Why does my engine stall when the EGR is open?
This is because the temperature is lower so fuel does not burn at the optimal temperature and as a result is less efficient. Stalling when the engine idles like a rough idle is usually caused when the EGR valve is permanently open and is constantly letting exhaust gases into the EGR system.
What are the symptoms of a failing EGR valve?
What are the symptoms of a failing EGR valve? A faulty EGR valve can cause problems with the flow and operation of the EGR system leading to performance issues including a reduction in power, reduced acceleration and decreased fuel efficiency. It can also cause vehicle emissions to increase.
How is the EGR valve controlled in a car?
It is a straightforward system which utilises a vacuum to switch the EGR valve from closed to open. The vacuum is often regulated by a computer-controlled solenoid. Most modern cars utilise an electronically controlled EGR which is controlled by the vehicle’s engine control module (ECM).
Is there a problem with the Buick 3800 V6?
The Buick 3800 V6 is a fairly reliable engine, but coolant leaks on the Series II 3800 engines with the plastic intake manifold have been a problem. The OEM intake manifold gasket tends to deteriorate after 60,000 or so miles in the area that seals the cylinder head coolant passage to the manifold.
What is the misfire code on a Buick 3800?
The Check Engine light should be on, and there should be one or more misfire codes for the cylinders that are misfiring. The last digit on a misfire code indicates the cylinder number. A code P0302, for example, would tell you cylinder #2 is misfiring. Chances are the misfire is due to a weak ignition coil.
What causes intermittent chuggle in Buick 3800 engine?
An intermittent chuggle or hesitation that can be felt during light acceleration or while cruising at highway speeds with no Check Engine light or no fault codes set may be caused by intermittent operation of the automatic transmission torque converter clutch (TCC).
What is distributorless ignition system on Buick 3800?
The distributorless ignition system on the 3800 V6 is a waste spark system with three ignition coils. Each pair of cylinders shares a common ignition coil. Cylinders that are opposite one another in the engine’s firing order are paired so their spark plugs share the same coil.
This is because the temperature is lower so fuel does not burn at the optimal temperature and as a result is less efficient. Stalling when the engine idles like a rough idle is usually caused when the EGR valve is permanently open and is constantly letting exhaust gases into the EGR system.
What are the symptoms of a failing EGR valve? A faulty EGR valve can cause problems with the flow and operation of the EGR system leading to performance issues including a reduction in power, reduced acceleration and decreased fuel efficiency. It can also cause vehicle emissions to increase.
It is a straightforward system which utilises a vacuum to switch the EGR valve from closed to open. The vacuum is often regulated by a computer-controlled solenoid. Most modern cars utilise an electronically controlled EGR which is controlled by the vehicle’s engine control module (ECM).
How does EGR reduce the production of NOx?
To reduce the amount of NOx pollutant emitted from your vehicle, exhaust gases need to be cooled before being emitted from your vehicle. In order to achieve this, they are introduced back into the combustion chamber via the exhaust gas recirculation (EGR) valve; this reduces the temperature and thereby inhibits the production of NOx emissions.
When does the EGR light come back on in a Honda?
EGR valve has been replaced more than twice, cleaned several times, and the light always comes back on within a couple days after leaving the shop. It also goes off after the battery is changed/disconnected, but returns in a couple days. My Honda dealer can’t explain it, and the van is running fine otherwise.
What’s the problem with my Honda Odyssey EGR?
Ok what y’all need to do to fix this problem is this: look up this video on YouTube and it will show you how to fix the problem. 2002 Honda Odyssey EGR cleanout. It’s not the actual EGR itself that is bad it is the carbon build up in the intake. It turned my engine light and tcs light off immediately. Let me know if it helped.
Can a bad ECM cause a car to stall?
Engine Stalling or Misfiring Erratic engine behavior may also indicate a bad or failing ECM. A faulty computer may cause the vehicle to intermittently stall or misfire. The symptoms might come and go and not appear to have any sort of pattern to their frequency or severity. 3. Engine Performance Issues
What causes a failure code on an EGR system?
Another common problem causing failure codes in this system is that the tip of the valve will become irregular shaped from carbon deposits. When this happens it no longer creates a perfect seal. This can allow exhaust gas to continue to flow when not called for by the computer. An example would be at engine idle or when the vehicle is cold.
What should I do if my EGR light is not working?
The repair of this condition is removal of the EGR valve and inspection of the passageway to check for a blockage. Each model vehicle has different procedures for clearing the passageway due to many different configurations of the system. Some Fords have a removable tube.
What happens when you have a bad EGR valve?
This, in turn, reduces the car’s performance and increases pollution as well. When there is a problem with the EGR valve, the check engine light or EPC (VW) light may appear on your dashboard. The two main issues EGR valves face are that, either the valve stays open or it shuts completely.
When to test the Ford EGR valve solenoid?
The following are the most common symptoms that a Ford (or Mercury or Lincoln) car or truck will usually experience when there’s a fault in the EGR System: Car or truck runs fine, but the check engine light (CEL) is on with an EGR Valve Fault Code: P0401 EGR System Flow Insufficient. P01406 EGR Valve Pintle Position.
Why is there an EGR code on my Ford?
However, we often find EGR codes on Ford products caused by inexpensive plastic parts that falsely report position to the control module. Several technical service bulletins for a wide variety of different makes and models have documented different problems associated with the EGR valve system.
What causes black smoke from the EGR valve?
2. Black Smoke from Exhaust. If the EGR valve stays open at all times and the exhaust fumes are being fed to the engine constantly, the engine gets deprived of oxygen. With too much fuel burning and less oxygen, a black smoke gets produced and escapes from the exhaust pipe especially when the car is idle.
What are the symptoms of a bad EGR valve?
A rough idle upon starting the engine (that is, when the engine is cold) and sometimes at a stop light or while looking for a spot in a parking lot (that is, at low engine speeds in a warmed-up engine). Stalling when the engine idles. Increase in fuel consumption.
Where are the EGR Jets in the intake manifold?
A more radical design, implemented in a few models, was the replacement of the valve with EGR jets at the bottom of the intake manifold. Some newer high-efficiency engines, for example those with variable valve timing (VVT), don’t even use an EGR system. If playback doesn’t begin shortly, try restarting your device.
Can a blanked off EGR improve engine performance?
Of course its not. The EGR pumps warm used air back into the engine instead of cold clean air. If you were to blank of the EGR, it would continuously get cold air thus an improvement in performance. For people looking for the best performance upgrade (such as myself), a remap with a blanked off EGR will provide excellent results.
What happens when the EGR passageway is blocked off?
When the EGR passageway becomes blocked off it keeps exhaust emissions and air from circulating in the engine, causing a suffocating condition. The engine idle will be rough, frequently stumbling and unable to hold a steady idle rpm. The rpm may be sporadic, raising and lowering randomly.
A rough idle upon starting the engine (that is, when the engine is cold) and sometimes at a stop light or while looking for a spot in a parking lot (that is, at low engine speeds in a warmed-up engine). Stalling when the engine idles. Increase in fuel consumption.
A more radical design, implemented in a few models, was the replacement of the valve with EGR jets at the bottom of the intake manifold. Some newer high-efficiency engines, for example those with variable valve timing (VVT), don’t even use an EGR system. If playback doesn’t begin shortly, try restarting your device.
How does the EGR work in a car?
The EGR valve recirculates burned exhaust emissions back into the intake system so the emissions can be re-burned, or “recycled,” out the exhaust. The system operates by the opening and closing of solenoid valves, regulated by a diaphragm.
Can a clogged fuel filter cause an engine to stall?
Stalling: If a clogged fuel filter goes unaddressed for too long, it may eventually cause the engine to stall as ideal fuel flow dwindles. Extra stress and heavy loads placed on the engine may instigate the stalling or, if you wait to focus on earlier warning signs, the engine could stall shortly after starting the car.
What should I do if my fuel filter is bad?
Most fuel filters are relatively inexpensive and easy to change. If you suspect that your vehicle’s fuel filter may need to be replaced, have the vehicle inspected by a professional technician, to determine if the component should be replaced.