Why does my Jeep Grand Cherokee not shift?
In cars with automatic transmissions, a shift interlock solenoid is also part of the ignition system, and it locks the transmission so it cannot be shifted out of park (as described above). Broken shifter mechanism: It is also possible that the shifter itself is broken.
What do you do when your shifter is stuck in Park?
By law, all 2010 and newer vehicles are equipped with brake-shift interlock. 1) Set the emergency brake. 2) Insert key into the ignition and turn the ignition switch to the “ON” or “RUN” position. It is not necessary to start the engine. 3) Locate the shift lock override slot located on the shifter console near the shifter lever.
What causes a car to not shift from Park to drive?
If an electrical or mechanical component has failed between the shifter and transmission, you won’t be able to shift the car out of park. A top-rated mobile mechanic will come to your home or office to diagnose the problem with your vehicle.
Why is my shift brake light not working?
If you’ve verified the brake lights are working correctly then the problem is most likely a faulty shift interlock solenoid. However, before replacing the interlock solenoid, use a digital multi-meter to rule out the problem being an open circuit in the wiring.
Why does my shift shifter not move through gears?
I’d suggest checking the shift linkage on the transmission to see if the cable came off. This is due to the connector end bushing falling apart and not being able to hold the cable on any longer. Some cables have to be replaced as a whole and as with others the bushing can be replaced to fix the cable.
What causes a GMC Sierra 1500 key to not turn?
What are common reasons my GMC Sierra 1500 key won’t turn? While there are a variety of reasons your GMC Sierra 1500 key won’t turn, the most common 3 are a binding steering column/lock, an ignition switch issue, or a problem with the ignition key.
If you’ve verified the brake lights are working correctly then the problem is most likely a faulty shift interlock solenoid. However, before replacing the interlock solenoid, use a digital multi-meter to rule out the problem being an open circuit in the wiring.
By law, all 2010 and newer vehicles are equipped with brake-shift interlock. 1) Set the emergency brake. 2) Insert key into the ignition and turn the ignition switch to the “ON” or “RUN” position. It is not necessary to start the engine. 3) Locate the shift lock override slot located on the shifter console near the shifter lever.
Symptoms that may indicate your shifter will fail include: When shifting into a gear, drive or reverse, it feels difficult to find the right spot. The transmission ends up in neutral instead. You may notice that the engine will accelerate when stepping on the gas pedal but the car doesn’t move.
Can a Jeep Grand Cherokee Drive in two gears?
You’re often still able to drive the vehicle, but it only operates in one or two gears. For example, you may find that you’re only able to drive the car in the automatic transmission’s third gear, only being able to select the other two gears when you shift the transmission manually.
How much does it cost to shift a Jeep Grand Cherokee?
Our certified mobile mechanics can come to you now. Jeep Grand Cherokee Car does not shift from park to drive Inspection costs $89 on average. You start the car up, put your foot the brake, push the button on the shifter and it won’t shift out of park.
What’s the Flash code on my Jeep Grand Cherokee?
Code 26 – Governor Pressure Sensor Offset Drift Code 55 – End of Message You may or may not be skilled enough to actually fix the problems indicated by the flash codes yourself, but you’re better-armed with an understanding of where the issues lay as you seek help from a mechanic.