Can you use a 24 volt battery on a 12 volt starter?

Can you use a 24 volt battery on a 12 volt starter?

24 volts will not hurt your starter as long as your solenoid only gets 12 volts.

What makes a starter motor stuck?

If the starter motor is itself “stuck”, meaning it does not move because its brushes are worn,have someone bang on it(on the starter motor) with a long piece of iron (a long tire iron,a piece of pipe, even a hammer if it reaches), while you ,AT THE SAME TIME,crank the engine, this is well known to sometimes get it …

How is a starter motor connected to ground?

The negative (ground) cable connects the negative “-” battery terminal to the engine cylinder block, or transmission, close to the starter. The positive cable connects the positive “+” battery terminal to the starter solenoid. Often, a poor connection at one of the battery cables can cause the starter motor not to run.

How do I know if my starter is 12v or 24v?

Look at the tag on the starter or look at how the batteries are hooked up. Have you lightly scraped any paint off of the starter’s data tag = it might say 12 V or 24 V; on it. no batteries there and no cable to hook the two batteries together there.

What is a series parallel switch?

The best description of a series-parallel switch – other than the descriptive adjectives used during the parking bay incident – would be that it is a mechanism that allows for two 12-volt batteries to be linked in series (forming 24-volts) for starting while also linked in parallel (12-volts) for charging.

Will a starter lock up a motor?

While a locked starter isn’t going to cause a seized engine, the symptoms are closely related. The two can feel the same. When the starter seizes with the solenoid stuck, it grabs the flywheel. Thankfully, this repair is much more manageable than a seized engine.

Does the starter need to be grounded?

It should be grounded through the flywheel housing and the mounting bolts. The motor Is grounded and runs if the car is push started. If starter has a ground then the only other thing this leads to be the wire between the solenoid and the starter. This will be true whether you’re replacing the battery or the starter.

Can you connect a 24 volt battery to a 12 volt starter?

Since the 24 volt system is two 12 volt batteries wired together in series to achieve 24 volts, you can’t just connect your starter wires to the terminals of your 24 volt array or you’d be pushing 24 volts to a 12 volt starter. Maybe someone has an elegant pre-packaged solution that allows you to isolate 12 volts just to the starter?

Is it safe to apply 24V across a 12V motor?

A motor which is designed for 12V is unlikely to have insulation which is rated for 12,000V even if one could otherwise drive the motor with very short 12,000V pulses without exceeding any of its other ratings.

Can a 24 volt charger charge a 12 volt battery?

If you charge 24V the charger will only charge the better battery of the two. So you would leave one battery not fully charged. The 24 volt deal works great. Larry’s battery’s have worked well for us and we are wired just like every else that has posted with (2) 12 volt battery’s and 12 volt solenoid.

Can you use a 24 volt battery on a 12 volt boat?

You should always use the battery that has the negative lead of the trolling motor going to it. If you use the other battery and you have one of your 12 volt accessories accidently ground out to the boat (tin boats) you will now get 24 volts to your 12 volt accessory and you better hope your fuse is quick enough to pop.