Do fuel gauges have fuses?
Particularly if you are experiencing an issue with more than one gauge on your vehicle, the culprit may be a fuse. If the fuse for the instrument panel has been blown, make sure to replace it. If the fuel gauge doesn’t sort itself out automatically, run the cluster test again.
Where is the fuse for the gas gauge?
The fuse box will either be located under the driver’s side dash or in the engine compartment, so consult your owners manual to pinpoint the location so you can replace the fuse.
What causes a fuel gauge to stop working?
Grounding the B/W wire will peg it past empty. If the gauge passes the test, it is working. When finished testing, be sure to connect the M/F splice on the B/W so it is now back to original. If there is 12V on the wire to the instrument cluster, but does not move by applying open or ground, the gauge is probably stuck.
What should I do if my gauges quit working?
The alt wasn’t charging. No tac and no speedometer. The Lights work fine, The odometer is still rollin over, cruise control works, Gear selection indicator read out works fine.. Any ideas? I haven’t dug too far yet, I didn’t have time today (monday) but I have Tuesday off so i was gonna start snooping around.
What should the fuel gauge peg past full?
Ground the black lead of the multimeter to ground and connect the red lead to the B/W wire. There should be 12V. If there is 12V the fuel gauge will peg to full. With the splice connection open, the gauge will peg past full. Grounding the B/W wire will peg it past empty.
How does the fuel gauge work on a JD x485?
Ground the black lead of the multimeter to ground and connect the red lead to the B/W wire. There should be 12V. If there is 12V the fuel gauge will peg to full. With the splice connection open, the gauge will peg past full. Grounding the B/W wire will peg it past empty. If the gauge passes the test, it is working.