Do motorbikes have an OBD?

Do motorbikes have an OBD?

Not all bikes have the latest OBD II connector, but the majority do now use the CAN bus protocol. It’s actually a safety feature that means the bike knows if the lamp fails, and can keep you safer in the dark.

How to read diagnostic trouble codes on Harley Davidson Softail?

For 2014 and later models, hold the odometer button down on the lift grip. Move the ignition switch to the ignition position. You’ll see the “DIAG” message displaying. Release the odometer button and press it again to read the different codes at each module.

Where is the data link on a Harley Davidson Softail?

Current 34 Loss of idle speed control IDLE AIR CONTROL Historic N/A Check engine light open/low NO CHECK ENGINE LAMP AT KEY ON or CHECK ENGINE LAMP ON CONTINUOUSLY Figure 2. This model’s data link connector is located under the seat.

Why is my Harley Davidson Softail not working?

These systems must stay properly powered by the battery. The wiring connecting the systems together must remain intact. These problems occur and, although difficult to find at times, a series of test will help you narrow down the cause. This article applies to the Harley Davidson Softail.

What kind of scan tool does a Harley Davidson Softail use?

The data link connector terminals. There are various brands and types of scan tools for the Softail. Some of the most common types are the Kent Moore/Harley Davidson Scanalyzer (part number HD-41325), the official Harley Davidson scan tool (part number MS531-HD), and the Harley Davidson Code Master Service code reader.

For 2014 and later models, hold the odometer button down on the lift grip. Move the ignition switch to the ignition position. You’ll see the “DIAG” message displaying. Release the odometer button and press it again to read the different codes at each module.

Current 34 Loss of idle speed control IDLE AIR CONTROL Historic N/A Check engine light open/low NO CHECK ENGINE LAMP AT KEY ON or CHECK ENGINE LAMP ON CONTINUOUSLY Figure 2. This model’s data link connector is located under the seat.

The data link connector terminals. There are various brands and types of scan tools for the Softail. Some of the most common types are the Kent Moore/Harley Davidson Scanalyzer (part number HD-41325), the official Harley Davidson scan tool (part number MS531-HD), and the Harley Davidson Code Master Service code reader.

These systems must stay properly powered by the battery. The wiring connecting the systems together must remain intact. These problems occur and, although difficult to find at times, a series of test will help you narrow down the cause. This article applies to the Harley Davidson Softail.