Do you have to weld a radiator support?
Yes. You do need to weld the rad support in. If you want to bolt it in, go a head.
How do you replace the radiator on a Honda Civic?
Be careful while applying torque load to the radiator support bolt. Before you lower the new radiator into place, attach the radiator fan shroud onto it (if applicable). Then, carefully lower radiator into place. Finally, bolt down the support bracket but don’t tighten it all the way. Figure 7. Attach fan shroud to radiator fan.
How to remove and replace a radiator support?
A 1996 Honda Accord was mainly used to demonstrate how to perform this task. Most radiator supports are welded in and have to be cut out and welded back in. If you are interested in learning more on how to do this type of repair and learn true body work and paint, follow this link: If you found this video valuable, give it a like.
Where is the overflow hose on a Honda Civic?
Once the cap is removed, grab the pliers, or flat head screwdriver, and loosen the clamp to remove the radiator overflow hose, then remove lower hose located on the bottom corner of the radiator. Figure 4. The overflow reservoir was located in that big empty space. Removing it will offer more flexibility. Figure 5. Remove lower radiator hose.
Is it hard to replace a radiator hood?
Replacing fenders and hoods are really not that hard as long as you have something that is straight and lined up to bolt them to. The hardest part about replacing a radiator support is cutting the welds. First you have to find and identify all the spot welds you will need to cut out. Then there is the physical work itself.
Be careful while applying torque load to the radiator support bolt. Before you lower the new radiator into place, attach the radiator fan shroud onto it (if applicable). Then, carefully lower radiator into place. Finally, bolt down the support bracket but don’t tighten it all the way. Figure 7. Attach fan shroud to radiator fan.
A 1996 Honda Accord was mainly used to demonstrate how to perform this task. Most radiator supports are welded in and have to be cut out and welded back in. If you are interested in learning more on how to do this type of repair and learn true body work and paint, follow this link: If you found this video valuable, give it a like.
Once the cap is removed, grab the pliers, or flat head screwdriver, and loosen the clamp to remove the radiator overflow hose, then remove lower hose located on the bottom corner of the radiator. Figure 4. The overflow reservoir was located in that big empty space. Removing it will offer more flexibility. Figure 5. Remove lower radiator hose.
Replacing fenders and hoods are really not that hard as long as you have something that is straight and lined up to bolt them to. The hardest part about replacing a radiator support is cutting the welds. First you have to find and identify all the spot welds you will need to cut out. Then there is the physical work itself.