How do you fix a airbag check?

How do you fix a airbag check?

How to Reset an Airbag Light

  1. Put the key into the ignition and turn the switch to the “on” position.
  2. Watch for the airbag light to turn on. It will stay illuminated for seven seconds and then shut itself off. After it shuts off, immediately turn the switch off and wait three seconds.
  3. Repeat Steps 1 and 2 two more times.

Where are airbag codes stored in a GMC?

Below you will find common airbag codes that can be stored in your airbag control module after your vehicle was in an accident.

Why is the airbag light on on my terrain?

Even though a resistance related trouble code is set and the airbag light on, the airbags will still work in a crash. The GM service bulletin #11-09-41-001 has identified the source of the airbag light on problem and it’s in the driver’s side and passenger side airbag connectors.

Is there an airbag light on Equinox terrain?

GM has issued a service bulletin #11-09-41-001 to address an Airbag light on Equinox, Terrain issue. In addition to the airbag light on, you may also find any of the following trouble codes: B0014 02, B0014 04, B0014 0D, B0014 0E, B0021 02, B0021 04, B0021 0D or B0021 0E.

How to reset GMC airbag module ( SDM )?

Questions? Call us at 888-779-9029 M-F 9-5 EST Passenger Airbag Module Deployment Circuit – (Single Stage Or Stage 1) Short To Ground or Earth Or Voltage (12 volt VSS) Out Of Range Passenger Airbag Module Deployment Circuit – (Single Stage Or Stage 1) Short To Ground orEarth Or Voltage (12 volt VSS) Out Of Range

Even though a resistance related trouble code is set and the airbag light on, the airbags will still work in a crash. The GM service bulletin #11-09-41-001 has identified the source of the airbag light on problem and it’s in the driver’s side and passenger side airbag connectors.

What’s the air bag code on a GM Truck?

From buying research to owner support, join 1.5 MILLION GM Truck Enthusiasts every month who use GM-Trucks.com as a daily part of their ownership experience. Truck has had a recurring issue with Code B0014, drivers “side” air bag high resistance.

GM has issued a service bulletin #11-09-41-001 to address an Airbag light on Equinox, Terrain issue. In addition to the airbag light on, you may also find any of the following trouble codes: B0014 02, B0014 04, B0014 0D, B0014 0E, B0021 02, B0021 04, B0021 0D or B0021 0E.

Is there an issue with the drivers side air bag?

Upon going in to the dealer Monday morning they checked the code and verified that it’s the same as before. they cleared it and said they will have to completely disassemble the drivers seat to find the problem but can’t get to it till after the holidays. My real question is, has anyone else had an issue with the drivers “side” air bag?