How do you remove the timing belt on a Daewoo?
Raise and support the vehicle on jack stands. Remove the intake air temperature wiring, the breather hose and intake air hose. Take off the air cleaner assembly. Remove the right wheel. Remove the accessory belts. Remove the crankshaft bolt and the crankshaft pulley. Remove the power steering bolts and the timing belt covers.
Where to place the belt on a Daewoo water pump?
Keep all the belt tension on the right side away from the tensioner. Loosen the bolts in the water pump and rotate the water pump counterclockwise to apply tension to the belt. Watch the tensioner, which is above the water pump, and apply tension with the water pump until the pointer on the tensioner lines up with the notch above it.
Can you change the timing belt at the same time?
Update if this helps: one place (which seems best so far) says the gaskets are nowhere near the timing belt and so you’d never do these two things at the same time. I’m not sure what gasket you mean then. Not the timing cover gasket? There’s a valve cover gasket I think, that you’d probably want to do… I think that it needs to come off anyway.
Do you need to change the timing belt on an Acura?
YMMV on Acuras, but they are both Hondas, after all. I’m 60k miles past the timing belt change and it still leaks not a bit. However, it is standard practice to replace the water pump while you’re in there. Water pumps never ever ever last the life of the car and when you have to fix them you have to, you guessed it, remove the timing belt.
Is it safe to replace timing belt on Daewoo Lanos?
This engine has been identified as an interference engine, whereas in the event of a failure of the timing belt the likelihood of major engine damage would be extremely high. For this reason it is not recommended to surpass the mileage for replacement.
How do you install a timing belt on a Daewoo water pump?
Tighten the water-pump bolts. Install the timing-belt covers and the bolts in the power-steering pump and tighten. Remove the crankshaft bolt and install the crank pulley and the bolt, then torque the crankshaft pulley bolt to 70 foot pounds of torque. Install all components in reverse order of removal.
Who is the owner of Daewoo Lanos auto service?
He has owned an auto service facility since 1982 and has over 45 years of technical experience as a master ASE tech. Bowman has a business degree from Pennsylvania State University and was an officer in the U.S. Army (aircraft maintenance officer, pilot, six Air Medal awards, two tours Vietnam). How to Change the Timing Belt on a 1999
Can a timing belt be replaced at the wrong tension?
Unfortunately it is not uncommon for the replacement belt to be installed at the incorrect tension because although the technician may have gone through the right procedure, they have undertaken the process on a hot engine.
He has owned an auto service facility since 1982 and has over 45 years of technical experience as a master ASE tech. Bowman has a business degree from Pennsylvania State University and was an officer in the U.S. Army (aircraft maintenance officer, pilot, six Air Medal awards, two tours Vietnam). How to Change the Timing Belt on a 1999 …
Unfortunately it is not uncommon for the replacement belt to be installed at the incorrect tension because although the technician may have gone through the right procedure, they have undertaken the process on a hot engine.