How do you reset the oil light on a 2010 Honda Fit?
Press and hold the SELECT/RESET button for more than 10 seconds. The engine oil life indicator and the maintenance code(s) will blink. Press and hold the SELECT/RESET button for more than 5 seconds. The maintenance items code(s) will disappear, and the engine oil life will reset to 100.
When do you reset the oil life light on a Honda Fit?
After changing the oil in your Honda Fit, you need to reset the Oil Life light back to 100%. If your oil life gets to 15% or below, the maintenance minder light (a little wrench light on your dash) will appear.
Do you need to reset the oil change indicator system?
After your oil change and servicing is complete, you may need to reset the engine oil change indicator system in your Fiat. Some servicers will neglect to do this, which can lead to premature and unnecessary service light triggers. There are many different ways this light can be reset depending on your model and year.
Do you reset the oil light when you change the oil?
Do not reset the oil light unless you have actually changed the oil. The light is there to tell you when it’s time to change the oil. Resetting the light without changing the oil may cause you to miss an oil change, which can damage your engine. Turn the car’s systems on, but leave the engine off.
Where is the oil reset button on my car?
If you don’t see a “Reset” button on the dashboard, it’s probably under the hood. If necessary, consult your manual, or contact the manufacturer’s customer service department. Hold the button down until the “Oil” icon or word starts to flash, or the indicator lights show some other sign of resetting.
How do you reset the Honda Fit oil life indicator?
To Reset Oil Indicator Light back to 100% on 2008, 2009, 2010, 2011, 2013, 2014, 2015 Honda Fit / Jazz, conform to the following instructions: Turn the ignition to position “On” without starting the engine. Press the Select/Reset knob until it displays the “oil life percentage”
How to reset the service interval ( oil change ) light?
How to Reset the Service Interval (Oil Change) Light with MaxxForce Engines 1 Set park brake 2 Turn the key on 3 Turn the cruise on 4 Turn the cruise off 5 Turn the cruise on 6 Very rapidly push the resume switch four times and then hold down on the fifth time for four seconds. 7 The “Change Oil” message should clear from the odometer window.
How to reset the Honda Fit service light?
The maintenance minder information display must be reset after performed the maintenance service or change the engine oil on your vehicle. Follow the instructions below to reset the maintenance light on your Honda Fit: If your vehicle has a Smart key button, press the “Start” button twice without touching the brake pedal. . . .
How to reset the oil change light on a 2008 Dodge Ram?
To reset the oil change light on a 2008 Dodge Ram, turn the key in the ignition, and depress the gas pedal three times. This five-minute procedure requires the vehicle’s key. Unlock the vehicle, sit in the driver’s seat, and close the door. Insert the key into the ignition. Depress the brake, and turn the key in the ignition.