How do you Torque a Range Rover lower arm?
Using the special tools, install the lower arm rear bushings. 2 . CAUTION: Make sure the bush is correctly aligned. 3 . Install the LH lower arm. Fit the bolts but do not fully tighten at this stage. 4 . Connect the shock absorber and spring assembly to the lower arm. Tighten the nut and bolt to 300 Nm (221 lb.ft). 5 . Release the halfshaft. 6 .
How much torque does a Range Rover have?
Tighten the lower arm bolts to 275 Nm (203 lb.ft). Align the bolts to the marks made previously. 16 . Install the RH lower arm. For additional information, refer to Lower Arm (60.35.02) (Section 204-01) 17 .
What is the torque for valve cover bolts?
Not much, something like 5-8 ft/lbs. Live in GA, But could be any where really. Depends on the gasket material, 5-8 is definately in the ball park with cork. If you get cork too tight, or tighten it after it has some age on it, it tends to squeeze out and crack.
How do you install head bolts on a Land Rover?
1. Lightly oil the threads of the new cylinder bolts, also apply some oil to the under side of the head bolts. 2. Install the bolts: Long bolts 1, 3 and 5. Short bolts 2, 4, 6, 7, 8, 9 and 10 (refer to diagram).
Using the special tools, install the lower arm rear bushings. 2 . CAUTION: Make sure the bush is correctly aligned. 3 . Install the LH lower arm. Fit the bolts but do not fully tighten at this stage. 4 . Connect the shock absorber and spring assembly to the lower arm. Tighten the nut and bolt to 300 Nm (221 lb.ft). 5 . Release the halfshaft. 6 .
Tighten the lower arm bolts to 275 Nm (203 lb.ft). Align the bolts to the marks made previously. 16 . Install the RH lower arm. For additional information, refer to Lower Arm (60.35.02) (Section 204-01) 17 .
1. Lightly oil the threads of the new cylinder bolts, also apply some oil to the under side of the head bolts. 2. Install the bolts: Long bolts 1, 3 and 5. Short bolts 2, 4, 6, 7, 8, 9 and 10 (refer to diagram).
When do Land Rover publish torque specifications for repairs?
Discussion in ‘ LR3 ‘ started by anothersilver, Apr 25, 2014 . Does Land Rover publish torque specifications for repairs? I am going to replace my front lower control arms, front/rear sway links, and front/rear bushings. For the control arms and spindle nuts I want to make sure I get everything tightened down right.