How long does it take for a DD15 engine to Regen?

How long does it take for a DD15 engine to Regen?

The High Exhaust System Temperature (HEST) lamp will flash for one second every ten seconds and eventually become solid when the tailpipe temperature is above 525°C (977°F).The engine speed will increase to 1100 RPM for all DD Platform engines. The regeneration will take 30 to 40 minutes.

What’s the best way to Park a DD15?

Keep engine at slow idle (cannot be in Fast Idle or PTO Mode). Put transmission in neutral (if equipped with an automatic transmission, cycle it into gear and then back to neutral). Air tank pressure must be high enough for the parking brake switch to hold in the OFF position.

How to check a Cascadia with Detroit DD15 EPA10?

I have this cascadia with detroit dd15 epa10 having the code… you need to do a low re fen to check the sensors. I dont like either reading you posted. disconnect the def injector, start a low temp re gen, which you can do with the service link program and the readings on the sensors should be with 50ppm of each other.

How long does it take to Regen a car at low idle?

The regeneration will take 30 to 40 minutes. The regeneration is complete when the engine returns to low idle and the DPF lamp remains OFF. The HEST lamp will remain ON, but the vehicle may be driven. NOTE: A parked regeneration will STOP and the engine will return to low idle if any of the following happens:

What happens when I do a parked Regen?

NOTE: A parked regeneration will STOP and the engine will return to low idle if any of the following happens: NOTE: If a parked regeneration is being performed to check NOx conversion, the calculated ambient temperature in the ACM (AS053) must be above 0°C (32°F) or the test will fail.

What should ambient temperature be for parked Regen?

NOTE: If a parked regeneration is being performed to check NOx conversion, the calculated ambient temperature in the ACM (AS053) must be above 0°C (32°F) or the test will fail. NOTE: If the HEST LAMP is FLASHING, a regeneration is in process and the system is coming up to temperature.