How to adjust the valve on a Polaris ATV?

How to adjust the valve on a Polaris ATV?

Turn the adjuster with a stubby flat blade screwdriver untill the proper clearance is achieved then tighten the locknut (5.8-7.2 ft. lbs) while holding the adjuster in place with the screwdriver. Re-check the clearance with the feeler guage one last time and re-assemble the covers (72 in.lbs) and plugs.

How to do a valve adjustment on a 2002 sportsman 400?

Hi, Does anyone know how to do a valve adjustment on a 2002 sportsman 400, diagrams or video would be great!!!!!. Ihear a ticking or tapping sound while the bike is in idle.

Do you need to replace gasket on Polaris ATV?

The sockets need to be in measured in millimeters and not inches. Replace the gasket for the valve cover when you are done adjusting the valves for the Polaris ATV, because, more often than not, it will tear. Look at the four valves for the Polaris ATV and their corresponding adjusters.

How can I Keep my Polaris ATV running?

Keeping your Polaris ATV in tip-top shape means you must do some maintenance on the engine. One of these tasks is adjusting the valves on the Polaris ATV. These tips will help you keep your ATV running for a long time. Keep track of the hours of operation on your Polaris ATV.

How to do a valve adjustment on a Polaris ATV?

Ihear a ticking or tapping sound while the bike is in idle. compression stroke. 1. Remove the seat. 2. Remove body panels and fuel tank as necessary to gain access to valve cover. 3. Remove the spark plug high tension lead and remove the spark plug. CAUTION: Place a clean shop towel into the spark plug cavity to prevent dirt from entering. 4.

Hi, Does anyone know how to do a valve adjustment on a 2002 sportsman 400, diagrams or video would be great!!!!!. Ihear a ticking or tapping sound while the bike is in idle.

How much does a 2004 Polaris Sportsman cost?

2004 Polaris Sportsman® 400 Specifications Model Type Utility BASE MSRP (US) $5,899.00 Dealers Polaris Dealers Warranty 6

The sockets need to be in measured in millimeters and not inches. Replace the gasket for the valve cover when you are done adjusting the valves for the Polaris ATV, because, more often than not, it will tear. Look at the four valves for the Polaris ATV and their corresponding adjusters.