How to get GM Delco Radio unlock codes when display says Loc?
This system was used from the ealy 1990’s to the early 2000’s. If your radio displays the word LOC, you can retrieve a set of factory numbers in the radio that enable you to get a backup unlock code.
Where can I get Delco radio code generator?
Truly appreciate programming part you can download directly in your computer dictionary from our downloading place. Then install it on your computer and go through the generation Delco radio code. After getting the real ordered Delco radio code you can enter it in your vehicle radio device that is locked.
What does INOP mean on a GM Delco Radio?
INOP means a secondary theft lock due to too many false attempts to unlock the radio. Looking at the face of your GM Delco radio, hold down the preset buttons 1 & 4 OR 2 & 3 (Depending on year and model) for approximately 10 seconds or until a set of 2 or 3 numbers comes up on the display. Write the numbers down. Next press the AM / FM button.
How can I repair my GMC CD player?
A “Reset” may bring this changer back to working. Disconnect negative terminal from battery, (most cases, negative terminal is easiest, 10mm), remove for 5 minutes and reconnect. This may bring the changer back to working, otherwise this is a repair issue. See Removal Guides and link to Shipping page before sending for repair.
How do you reset a locked GM radio?
Under normal circumstances, a locked Theftlock radio must be reset by a licensed GM dealer, who uses a special code known only by dealership personnel. By entering the code yourself, you can avoid the trouble and expense of paying to have your vehicle’s radio unlocked at the dealership.
What to do if your GMC radio says INOP?
If radio display reads “INOP” while the vehicle is on, too many incorrect radio codes have been entered. To remove “INOP” from your display and unlock your radio, you must leave the key in the On position for one hour. Once you’ve retrieved your radio unlock code, write it down for future use.
How do I get a GMC radio code?
If your dealer is charging a larger fee, consider calling another dealer or doing a Google search for sites offering GMC Radio codes. They usually charge a small (around $10) fee. Step 5: Start your vehicle and turn on the radio. Press the Hour button on the radio until the first two number of the code appear.
How much does it cost to replace a GMC radio?
Whether you’re trying to upgrade features or just need to replace a CD, CD6, CD/Cassette, CD Changer or some other factory original GMC radio, give us a try. Our prices are significantly less than the dealer. Don’t see what you’re looking for?
What to do if your GM Radio is locked?
Then, press the power button on the radio’s volume dial to turn on the radio. The digital display will read “LOC” if the radio is locked. If you don’t see the letters “LOC” but your radio isn’t working, the issue may lie elsewhere. Take your car to a qualified GM mechanic or car radio technician to have them diagnose the source of the problem.
Do you have to pay to unlock a GMC radio?
The downside of the Theftlock system is that if your battery dies or becomes disconnected, you’ll need to enter the radio code to deactivate the Theftlock system. You don’t need to special tools or to pay to unlock your Theftlock protected radio. Here are the simple and easy steps to unlock your Chevy or GMC radio. You’ll need a pen and paper.
This system was used from the ealy 1990’s to the early 2000’s. If your radio displays the word LOC, you can retrieve a set of factory numbers in the radio that enable you to get a backup unlock code.
INOP means a secondary theft lock due to too many false attempts to unlock the radio. Looking at the face of your GM Delco radio, hold down the preset buttons 1 & 4 OR 2 & 3 (Depending on year and model) for approximately 10 seconds or until a set of 2 or 3 numbers comes up on the display. Write the numbers down. Next press the AM / FM button.
Then, press the power button on the radio’s volume dial to turn on the radio. The digital display will read “LOC” if the radio is locked. If you don’t see the letters “LOC” but your radio isn’t working, the issue may lie elsewhere. Take your car to a qualified GM mechanic or car radio technician to have them diagnose the source of the problem.
What happens if you don’t unlock your car radio?
This system is designed to lock the radio from use in the event of a loss of power, either from being disconnected or when the battery loses its charge. If the radio is removed from the vehicle and installed in another car, it is rendered useless without the radio unlock code.
If your dealer is charging a larger fee, consider calling another dealer or doing a Google search for sites offering GMC Radio codes. They usually charge a small (around $10) fee. Step 5: Start your vehicle and turn on the radio. Press the Hour button on the radio until the first two number of the code appear.
How can I unlock my locked GM radio?
Dial 1-800-537-5140 to connect with GM’s toll-free radio hotline. Once you’re connected, you’ll be asked to provide your vehicle’s radio identification number, along with a special dealer access code. You’ll then be rewarded with a 4-digit retrieval code, which will allow you to unlock your radio.
If radio display reads “INOP” while the vehicle is on, too many incorrect radio codes have been entered. To remove “INOP” from your display and unlock your radio, you must leave the key in the On position for one hour. Once you’ve retrieved your radio unlock code, write it down for future use.
How to unlock your Chevy or GMC radio?
How to Unlock a Chevy Radio. Step 1: Start the vehicle and turn on the radio. Step 2: Press and hold preset numbers 2 and 3 until a three digit code appears on the radio display. Write this code down. Step 3: Press the AM/FM button. Your radio will display a second three digit code. Write the second code down.
Who is the owner of the GMC Sonoma?
GENERAL MOTORS, GM, the GM Emblem, GMC, the GMC Emblem and the name SONOMA are registered trademarks of General Motors Corporation. This manual includes the latest information at the time it was printed. We reserve the right to make changes in the product after that time without further notice.
How do you put a three digit code on a car radio?
Step 1: Start the vehicle and turn on the radio. Step 2: Press and hold preset numbers 2 and 3 until a three digit code appears on the radio display. Write this code down. Step 3: Press the AM/FM button. Your radio will display a second three digit code.
When does a car radio say LOC or INOP?
Most 1990’s through early 2000’s GM cars and trucks used a theft system to lock the radio when power is lost. If your radio displays the word LOC or INOP you can easily retrieve a set of numbers that enables us to give you the unlock code and instructions. STEP 1:
Where can I find the TheftLock radio code?
You will find the “TheftLock” radio code feature on most Pontiac, Cadillac, GMC, Chevrolet, Saturn, Geo, Oldsmobile, Hummer and Buick vehicles.
How do I get the unlock code on my Radio?
If your radio displays the word LOC or INOP you can easily retrieve a set of numbers that enables us to give you the unlock code and instructions. STEP 1: With the key on, hold down the radio preset buttons 1 & 4 (or 2 & 3 on some models) for approximately 10 seconds or until a set of 3 numbers comes up on the display. Write the numbers down.
If your radio displays the word LOC or INOP you can easily retrieve a set of numbers that enables us to give you the unlock code and instructions. STEP 1: With the key on, hold down the radio preset buttons 1 & 4 (or 2 & 3 on some models) for approximately 10 seconds or until a set of 3 numbers comes up on the display. Write the numbers down.
What does it mean when LOC is displayed on a radio?
When “LOC” is displayed, the radio must be unlocked with the user or factory back-up code before it will operate again. You may use or ignore the Theftlock system for the radio. If Theftlock is not activated, the radio plays normally and is not protected by this feature.
Why is my Chevy TheftLock radio not working?
The radio display will read “LOC” and the device will not turn on. Whenever your Chevy battery is disconnected or the battery dies, the Delco Theftlock radio enters the “LOC” mode. Follow these steps and you can reset the anti-theft radio and return the radio to a working state.
Why is there an error message on my DVD player?
Check Applicable Products and Categories for details. If you experience difficulty playing a disc and you receive any of the following error messages, there may be an incorrect setting or there may be a problem with the disc that you are trying to play. IMPORTANT: Not all CD/DVD players are supplied with the same functions and/or features.
Why is there an error on my Blu ray?
An error code or message appears when trying to play a DVD or Blu-ray Disc media. How to watch a Blu-ray Disc movie that is mastered in 4K on a Sony 4K TV.
What to do if you enter the wrong radio code?
Also tell us what, if anything you’ve done since entering the wrong code. – dlu Jul 20 ’16 at 13:38 If cycling the key doesn’t work, pull fuse number 15 in the underdash fuse box and re-insert. Re-enter the radio code. You have 10 tries to do this correctly before you are permanently locked out.
What is the latest encryption code for SiriusXM?
SiriusXM is updating your Radio with the latest encryption code. Wait until the update is complete. This message may also display when you are trying to tune to a channel that is unavailable or blocked.
What do I need to unlock my GMC radio?
To remove “INOP” from your display and unlock your radio, you must leave the key in the On position for one hour. Once you’ve retrieved your radio unlock code, write it down for future use. Your radio code will not change and having it handy will save from going from the radio code retrieval process again.
How to get a Blaupunkt stereo radio code?
Get a Blaupunkt stereo radio code quickly and easily, just follow the 3 simple steps on the right. 1)First, remove the radio from the car.2)Find the serial number to unlock Read more… Your Chevrolet radio code just two minutes away! Retrieve your General Motors TheftLock radio code now enter radio code to deactivate the Theftlock system.