How to reset oil service light in GMC trucks?

How to reset oil service light in GMC trucks?

From years: 2001, 2002, 2003, 2004, 2005, 2006, 2007. Turn the ignition to run (one position before starting engine). Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds. If the Change Oil Soon light flashes the system is resetting. Turn the ignition off and then start the engine to verify the indicator has been reset.

How do you turn off the oil light?

Sit in the driver’s seat with the doors closed. Insert the key into the ignition and turn the key to the accessory power position. All the lights will be displayed on your instrument panel. 2. Within five seconds of turning the key, depress the accelerator fully to the floor three times. 3. Watch for the oil light to flash and turn off.

How do you reset the oil light on a Honda Accord?

While the oil life message is displayed, press and hold the Enter button on the Driver Information Center for one second. 3. The Driver Information Center will display a reset acknowledgement message. Turn the key to the off position. After you’ve reset the oil light, turn the key to the off position.

When does the oil change light come on?

The oil change light is triggered when the vehicle has counted down the expected life of your oil to zero. If you’ve had your oil changed at an authorized dealer, the technician will reset the light as part of the service.

From years: 2001, 2002, 2003, 2004, 2005, 2006, 2007. Turn the ignition to run (one position before starting engine). Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds. If the Change Oil Soon light flashes the system is resetting. Turn the ignition off and then start the engine to verify the indicator has been reset.

Is there a way to reset the oil change light?

If you’ve had your oil changed at an authorized dealer, the technician will reset the light as part of the service. If playback doesn’t begin shortly, try restarting your device.

How do you check the oil life on a Chevy?

Locate and press the VIC button. The VIC button will have an image of a road or the letter “i” on it. Repeatedly pressed the VIC button until “oil life” is displayed on the onscreen menu. 3. Press and hold the check mark button on the VIC for five to ten seconds until the oil life display reads 100%.

While the oil life message is displayed, press and hold the Enter button on the Driver Information Center for one second. 3. The Driver Information Center will display a reset acknowledgement message. Turn the key to the off position. After you’ve reset the oil light, turn the key to the off position.