How to reset the oil light on a 2003 Honda Accord?
Press the “Select/Reset” knob and hold it. The knob is in the lower-right corner of the instrument cluster. Turn the ignition switch to the “On” position, without starting the car. Continue to hold the knob pushed in for approximately 10 seconds. The “Maintenance Required” light will turn off. Release the knob and turn the ignition off.
How to reset your Honda engine oil maintenance light?
Depending on your model, either scroll through or press the knob repeatedly until “Engine Oil Life” or “Engine Oil Indicator %” is displayed. Step 3: Press and hold the Select/Reset button for 10 seconds.
How do I Reset my maintenance required light?
Press and hold the reset button until you see the oil life indicator (this says “oil life” and has a percentage). Resetting changes the percentage to 100. Let go of the button and press it again, holding it for 10 seconds. The oil life indicator and maintenance requirement light blinks. Let go of the button one more time and hold for five seconds.
Where is the maintenance required indicator on a Honda Accord?
The 2003 Honda Accord is equipped with a “Maintenance Required” indicator located in the top-right corner of the instrument cluster. Its function is to alert you when it’s time to change the Accord’s engine oil.
How do I reset the required maintance light?
- Turn ignition switch to the ON position
- Trip Display to TRIP A mode
- Turn the ignition switch to the OFF position
- Depress and HOLD the Trip Meter RESET button while turning the ignition switch to the ON position.
How do I Turn Off the maintenance required light on my Honda?
How to Turn Off the Maintenance Required Light on a Honda Civic. Put the key in the ignition. Press and hold the odometer reset knob. This is the knob that sticks out on the bottom right of the instrument cluster. While holding this button, turn the key to the “On” position, but do not start the engine.
How do I reset maintenance light?
Turn your vehicle’s ignition to the “acc” setting while holding the button. Do not crank the vehicle. Hold the position for five seconds and turn the ignition key off. Release the button. The maintenance light will be reset and will illuminate again the next time service is due.
When did the Honda Accord 2003 come out?
At its introduction in 2003, it won the Car of the Year Japan Award for a record third time.
How to reset Honda Accord maint REQ’D light at home?
Select “Maintenance Reset” using the arrow buttons, then press the SEL/RESET button. Select “Reset” using the arrow buttons, then press the SEL/RESET button. The maintenance item code(s) will disappear and the engine oil life will reset to “100”.
Press the “Select/Reset” knob and hold it. The knob is in the lower-right corner of the instrument cluster. Turn the ignition switch to the “On” position, without starting the car. Continue to hold the knob pushed in for approximately 10 seconds. The “Maintenance Required” light will turn off. Release the knob and turn the ignition off.
How do you reset the Maintenance Minder on a 2012 Honda Accord?
2012-2015 w/ Multifunction display: Set power mode to ON. Select “Vehicle Settings” in the display using the arrow buttons located on the steering wheel, then press the SEL/RESET button. Select “Maintenance Minder Reset” using the arrow buttons, then press the SEL/RESET button.
How do you reset the ignition switch on a Honda Accord?
Turn the ignition switch to the ON (II) position. Select “Vehicle Settings” in the display using the arrow buttons located on the steering wheel, then press the SEL/RESET button. Select “Maintenance Reset” using the arrow buttons, then press the SEL/RESET button. Select “Reset” using the arrow buttons, then press the SEL/RESET button.
When did the Honda Accord seventh generation come out?
The seventh generation of the Accord was launched in 2002 (2003 model year in North America), and consists of two separate models; one for the Japanese and European markets, and the other for North America, with the Japanese and European model being sold in North America as the Acura TSX.
Select “Maintenance Reset” using the arrow buttons, then press the SEL/RESET button. Select “Reset” using the arrow buttons, then press the SEL/RESET button. The maintenance item code(s) will disappear and the engine oil life will reset to “100”.
How do you reset Honda Pilot Oil Change light?
Turn the ignition switch to the OFF (0) position. Press and hold the Select/Reset button(s) in the instrument panel, then turn the ignition switch to ON (II) position. Hold the button(s) for 10 seconds or until the indicator resets.
How do you reset the oil life on a Honda Accord?
Press and old “ SELECT/RESET ” for 10 seconds, then release the stem. Press an hold “ SELECT/RESET ” for 5 more seconds. Turn the ignition off, then back on. The Engine Oil Life should now be reset to 100%. Turn the ignition to the “ OFF ” position.
How do you reset the service light on a Honda Accord?
When the Engine Oil Life is 5% or lower, the “ SERVICE ” light will illuminate. Turn the ignition to the “ RUN ” position. Do not start the engine. Press the “ SELECT/RESET ” stem until the Engine Oil Life is displayed. Press and old “ SELECT/RESET ” for 10 seconds, then release the stem.
How do I reset the engine oil life?
If you change the oil in your Honda Accord, you will want to reset the Engine Oil Life and/or the “Main Reqd” light indicator. Just use these steps. Turn the ignition to the “ On ” position. Do not start the vehicle. Press the “ Select ” knob to toggle the setting to “ Engine Oil Life “.
How do you reset the maintenance required indicator?
Turn the ignition to the “OFF” position. Press and hold the “Select” and “Reset” switch at the same time. Continue to hold both buttons while turning the ignition to the “RUN” position. Do not start the engine. Still hold both “Select” and “Reset” for 10 seconds. The Maintenance Required indicator should reset.