Is the BM 800 worth it?
To conclude, the BM-800 is a great microphone if you are limited budget wise. It works well without a pre-amp, and results would be better with one. Construction is great – everything is made out of metal, and feels very high quality and can take a beating.
Does BM-800 need phantom power?
Microphone— The Floureon BM-800 condenser microphone only works with device that could provide enough power with 48V phantom power adapter. If the power is not enough while being used with amplifier or mixer, the sound volume might be recorded very low. If better sound prefered, the sound card will be needed.
Are condenser mics worth it?
Condenser microphones, therefore, offer superior sound quality. Of all microphone types, condensers have the widest frequency response and the best transient response (transients are fast bursts of energy, e.g. the attack of a drum or the “pick” of an acoustic guitar).
Does BM 800 need phantom power?
What is a 48V phantom power?
Phantom power, commonly designated as +48V or P48, was designed to power microphones without using bulky external power supplies such as the ones required for tube microphones. It’s a way of sending the DC electrical current required through a balanced XLR cable.
What happens if you don’t use phantom power on a condenser mic?
Although you may still get a signal from some condenser mics without phantom power, it will be so weak that it will be barely audible. In most cases, you won’t get a signal at all. Condenser mics need power to operate correctly whether that be battery or phantom power.
Can I plug a condenser mic into a computer?
Nearly all computers have a mic port (nowadays often combined with a headphone port), so it should be possible to directly connect a dynamic mic if you have the appropriate jack for the socket. Also, it is not possible to directly connect a condenser microphone to a simple computer mic port – it won’t work.
Is phantom power necessary for condenser mics?
Put simply, condenser microphones have active electronics that need an external power source, while dynamic mics are passive and therefore do not need phantom power. Because of the way condenser mics work, their output is very high impedance, and therefore requires a powered circuit to reduce that impedance.
Does bm800 need preamp?
What you need is not just phantom power, you need an actual microphone preamplifier that has phantom power. Don’t expect good results from internal sound cards on mainboards.