What can a Cummins ISM engine be used for?
The Cummins ISM is the alternative engine to the larger ISX for local and long haul applications. Although mostly seen in daycab tractors and vocational trucks, the ISM engine can also be found in large motorhomes and fire equipment. 1.)
Can a Cummins ISM be used in a daycab?
The Cummins ISM is the alternative engine to the larger ISX for local and long haul applications. Although mostly seen in daycab tractors and vocational trucks, the ISM engine can also be found in large motorhomes and fire equipment. In 2002, upgraded to the CM875 fuel system which included an EGR valve for EPA emmission…
Where can I find Cummins manuals and technical documents?
Cummins produces a wide variety of documents to help customers get the most from their engines, generators and components. Much of this library is available online. Check out the digital resources listed below or contact us for help with your specific needs.
Is the Cummin ISX in a 07 379?
It also is in an 07 379. Being that is a 500 it does not seem to be as prone to the Cam issues as the larger hp motors. Every month 400 people find a job with the help of TruckersReport. Please Select… I Need CDL Training In CDL School Now CDL Grad, No Experience 1-5 Months 6-11 Months 1 Year 2 Years 3 Years 4 Years 5+ Years
When did Cummins change to the cm876 fuel system?
In 2007, upgraded to the CM876 fuel system. This fuel system still includes the EGR, but also added a Diesel Particulate Filter (DPF) to conform to the new EPA standards. Use the charts below for useful information for the ISM engine:
When did Cummins change to EGR fuel system?
In 2002, upgraded to the CM875 fuel system which included an EGR valve for EPA emmission compliance. 2.) In 2007, upgraded to the CM876 fuel system. This fuel system still includes the EGR, but also added a Diesel Particulate Filter (DPF) to conform to the new EPA standards.
What to do if your Cummins pump has no pressure?
Sucking air will definitely kill the pressure. If you check it out and have no air, and no pressure, and vacuum less than 6, put a hose into a pail and see if it will run with a direct line. It is not common for that pump to fail.
Is there a power balance code on Cummins Insite?
Using Cummins Insite it has no codes except power balance code from #3 that has had a misfire for a couple weeks and they refuse to give me time to diagnose, power at the fuel solenoid, 25 psi fuel pressure cranking, it will fire on ether.
How many cubicles are in a Cummins ISM?
You can turn them up increasing HP and torque but when you get down to the hard pull it still lacks the mechanical advantage. Eights compaired to sixs is a little different subject. Their are about 61 cubic incles to a liter. ISM is a later model of the M11, aprox 671 CID.
How big is the stroke on a Cummins ISM?
2: Your Mack catches the best of both worlds. At 12L it has a 6.5 in stroke like the big bore engines but weighs a lot less. 3: Stroke on a C15 is 6.75, D 12.7 is 6.3, D 14L is 6.61, ISX 14.9L is 6.65 for compairison.
Is the ISM on a Cummins Shaker good?
Throttle will cut out motor falls to idle stop engine light 10sec latter everything comes back no codes,days will go by no problem then every turn act up. Short period drove a 03′ Shaker with the ISM it was good all around 7+/8.5mpg loaded/empty.good luck
How many miles does a Cummins ISM 425 get?
I had a 2000 International 9900 with an ISM 425 which I ordered new and drove it until 2007 when it had a little under 300,000 miles. It was a Logging truck with a self-loader so it had some time more than 300,000 highway miles. Usually hauled 80,000 lb or more loads. In the winter 90,000 or more (which is legal here). Over 90,000 it struggled.