What does 12-inch rough in mean for a toilet?
The toilet rough-in refers to the distance from the finished wall to the center of the toilet’s floor drain or waste outlet. Most toilets have a rough-in of 12 inches, although it’s not uncommon for older homes to have an unusual size such as 10″ or 14″. Rear-outlet toilets are configured a bit differently.
Can I replace a 14-inch rough in toilet with a 12-inch?
Replace a 14-inch rough-in toilet with a 12-inch rough-in toilet. You can definitely replace a toilet with a rough-in of 14 inches with one with a rough of 12 inches. The problem with this method is that a 2-inch gap will be left between the toilet tank and the wall. Install an offset toilet flange.
What is the difference between a 12 and 14 rough in toilet?
While 12-inch rough-ins are more generally common than 14-inch rough-ins, they both have their merits, and sometimes you need to reduce the space taken up behind the tank, which is where a 14-inch rough-in comes in handy. So if you’re looking to install 14-inch rough-in toilets, then you’ve come to the right place.
Can you put a 12-inch rough in toilet in a 10-inch rough in?
The rough-in for your bathroom plumbing should match the rough-in for the toilet. Even if a toilet is designed for a 10-inch rough-in, you can still install it in a space with a 12-inch rough-in.
How do I know if I need a 10 or 12 rough-in toilet?
Take the cover off of the toilet tank, and lay the toilet on its side to access the underside of the base. Measure from the back edge of the base to the center of the closet hole, or drain hole. Note if the measurement is 10 inches or 12 inches.
Can you offset a toilet?
For the waste water line, an offset toilet flange will allow you to move the toilet a couple of inches in any direction without having to cut a new hole in the floor or reconstruct the waste water pipe. Additionally, an offset flange may cause a stoppage as the water leaving the toilet will be diverted slightly.
Does toilet rough-in size matter?
For a standard toilet, the rough-in measurement should be between 11 inches and 13 inches. If the rough-in measurement is not between 11 inches and 13 inches, a standard toilet will not fit the space, and you will need to look for a toilet designed for that specific rough-in distance.
Do offset toilet flanges work?
Yes, all offset flanges will affect the flow somewhat, some drastically. A company named Sioux Chief makes one that I would not hesitate to use on my own home, called a Full Flush, part #889-POM (PVC) or 889-AOM (ABS).
What is standard toilet offset?
12-inches
The typical offset is 12-inches for most residential toilets.
How far should toilet drain be from wall?
12-inch
The rough-in distance in the newer homes from the wall to the center of the toilet drain is 12-inch, while, older homes have a distance of anything between 10- or 14 inches. A wall-mounted toilet also needs a 10 inch thick wall to accommodate the flushing system.