What does code P1381 mean?
The P1381 code is Cylinder Position Sensor Intermittent Interruption. Possible causes. – Faulty Cylinder Position Sensor. – Cylinder Position Sensor harness is open or shorted. – Cylinder Position Sensor circuit poor electrical connection.
What is the p1381 code on a Honda Accord?
If not, replace the distributor housing, if it is ok check for continuity to ground between each terminal ( same ones ) and body ground. If there is continuity replace the distributor . Here is a picture of the coil shield location. The P1381 code is Cylinder Position Sensor Intermittent Interruption.
How much does it cost to repair a p1381 Honda engine?
Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. The cost of diagnosing the P1381 HONDA code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
What is the engine code for a 1998 Honda Accord?
Engine code 20T2N Make Year of construction Engine capacity Honda Accord 1997 2,000 cc 1998 1,994 cc, 2,000 cc Honda Civic 1998 2,000 cc Rover 200 1998 1,994 cc, 2,000 cc 1999 1,994 cc, 2 Rover 25 2000 1,994 cc, 2,000 cc 2001 1,994 cc, 2
Where to find trouble code on Honda Accord?
Trouble codes can be displayed by LED in engine control module (ECM) – 1990 or malfunction indicator lamp (MIL) – 1991-93. Jump service check connector terminals Image 1 1990 – access engine control module (ECM) Image 2 Switch ignition ON. Check ECM LED is flashing. Individual short flashes display trouble code A short pause separates each flash
How much does it cost to diagnose Honda engine code p1381?
The cost of diagnosing the P1381 HONDA code is 1.0 hour of labor. The auto repair’s diagnosis time and labor rates vary by location, vehicle’s make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
What should cylinder resistance be on Honda Accord?
If the code comes back, you need to check the cylinder position sensor at distributor, unplug the 4 wire connector at distributor, ( key off ) if you look at the connector with the nipple up, you need to check resistance ( using an ohmmeter ) between the 2 terminals farthest to the right it should be between 800-1500 ohms.
What is the CYP sensor on a Honda Accord?
Cylinder Position (CYP) Sensor detects the position of No. 1 cylinder for sequential fuel injection to each cylinder. The CKP/TDC/CYP Sensor is built into the distributor.
What causes a Honda cylinder sensor to malfunction?
P1381 HONDA Possible Causes 1 Faulty Cylinder Position Sensor 2 Cylinder Position Sensor harness is open or shorted 3 Cylinder Position Sensor circuit poor electrical connection