What does the VSA light mean on a 2009 Honda Accord?
Hi There, The VSA light indicates that something may be wrong with your Vehicle Stability Assist (VSA) system, otherwise known as your traction control system. When the ECU senses an abnormal speed given specific conditions, it engages the ABS or traction control as needed to control the vehicle properly and safely.
Why is the VSA light not working on my Honda Accord?
When this sensor is no longer sending a signal to your Honda’s VSA system, it is no longer functioning properly and the VSA light will be activated (typically the ABS light will as well). The VSA system is run through the ABS System, which means that it can be the ABS module that causes the Accord’s VSA light to come on.
What are the brake warning lights on a Honda Accord?
My daughter has a 2008 Honda Accord Sedan. She just turned 16 and has only been driving it for 3 days. She called and said some lights were coming on the display. I had her come by the house and these lights were on…… the ABS indicator, the VSA indicator and the brake system indicator.
How to fault reset Honda ABS and VSA?
Honda ABS / VSA Fault Reset Procedure: Turn the Ignition switch OFF and take the key out. Short pins 4 and 9 on the OBD connector located under the dash on the driver side. Now put your foot on the brake pedal and hold it down lightly while turning on the ignition switch to position “II” (all the dash lights come on, but don’t start it).
What is the brake pressure sensor code on a Honda Accord?
Honda Accord VSA light on. Codes 66-1 and 84-1 brake pressure sensor. Fault finding and repair. – YouTube If playback doesn’t begin shortly, try restarting your device.
When this sensor is no longer sending a signal to your Honda’s VSA system, it is no longer functioning properly and the VSA light will be activated (typically the ABS light will as well). The VSA system is run through the ABS System, which means that it can be the ABS module that causes the Accord’s VSA light to come on.
What does the ABS light mean on a Honda Accord?
The ABS light is different than the brake warning light itself. The brake light indicates that there is a problem with the physical braking system and that your Accord is unsafe to drive. Yes, you can drive your Accord with the ABS light on. Is it safe? It’s not as safe, especially when it’s raining, snowing, or the road surface is loose/uneven.
Honda ABS / VSA Fault Reset Procedure: Turn the Ignition switch OFF and take the key out. Short pins 4 and 9 on the OBD connector located under the dash on the driver side. Now put your foot on the brake pedal and hold it down lightly while turning on the ignition switch to position “II” (all the dash lights come on, but don’t start it).
What does the VSA light on my car mean?
My car has an automatic transmission. Hi There, The VSA light indicates that something may be wrong with your Vehicle Stability Assist (VSA) system, otherwise known as your traction control system. The traction control system uses wheel speed sensors at each of the wheels, which monitor wheel speed and relay this information to the ECU.