What is an ISM motor?
The Cummins M-series engine is a straight-six diesel engine designed and produced by Cummins. It displaces 10.8 litres (659.1 cu in). The M11 CELECT Plus became the ISM when Cummins applied its Interact System (hence the “IS” in ISM) to the M11 CELECT Plus in 1998 to further improve the engine.
How much oil does a Cummins ISM hold?
|Advertised Horsepower||280-450 hp (209-336 kW)|
|Number of Cylinders||6|
|Oil System Capacity||10.2 U.S. gallons (38.6 liters)|
|System Weight||2,268 lb (1028 kg)|
|Engine (Dry)||2206 lb (1000 kg)|
What is Cummins celect?
The N14 Celect was the first Cummins engine to feature an electronic injection system. The Celect fuel system produces systematic pressure throughout each injection cycle unlike the common rail fuel system of the 855, or older M11 or L10 models.
What is a L10 Cummins?
The Cummins L10 is a 10-Liter Engine inline 6 cylinder configuration. The first L10 Cummins Engines were a mechanical style engine. Later the electronics were incorporated into the L10 Cummins Engines. The L10 Cummins Engines were produced from the mid 80’s to the late 90’s.
How many gallons of oil does a Cummins X15 take?
Cummins design allows regeneration even in adverse operating conditions and reduces particulate matter more than 90%….Overview:
|Advertised Horsepower||385-600 HP (287-447 kW)|
|Clutch Engagement Torque||1000 LB-FT (1356 Nm)|
|Number of Cylinders||6|
|Oil System Capacity||14 U.S. Gallons (52.9 Litres)|
How much oil does a Cummins ISB 6.7 hold?
6.7L Cummins Diesel Specs
|Production Years:||2007.5 – current|
|Oil Capacity:||12 U.S. qts w/ filter|
|Fuel:||ULSD; 2007 – 2013 models are B5 Biodiesel compatible, 2013.5+ models are B20 biodiesel compatible|
|Governed Speed:||• 3,013 rpm (2007 – 2012) • 3,000 rpm (2013+)|
|Horsepower:||350 – 420 hp, see chart below|
How much does a Cummins ISM engine weigh?
I’m looking to buy another haul truck, a Peterbilt with the Cummins ISM mated to a 10-speed. The truck weighs about 17,000 and I’ll be pulling about 45,000 at the most. Does anyone have any feedback about the ISM. My truck now has the N14 set up for 460HP which is a powerhouse although I have had some problems with the ECM and a lot of oil leaks.
Is the ISM on a Cummins Shaker good?
Throttle will cut out motor falls to idle stop engine light 10sec latter everything comes back no codes,days will go by no problem then every turn act up. Short period drove a 03′ Shaker with the ISM it was good all around 7+/8.5mpg loaded/empty.good luck
What kind of Cummins engine is for sale?
2008 Cummins ISM .Used diesel engine for sale. 330 HP. CPL 2729. Tested and inspected with 120 day warranty. Call or visit our website for more information.. (USED) 2004 CUMMINS ISM 280 Complete Engine.
How much does a Cummins diesel engine cost?
USED ISM-350 CUMMINS ENGINE, EGR VALVE, CPL:3281, 2010 TRUCK, COMPLETE, INSPECTED AND TESTED RUNNING ENGINE, ALSO MANY ENGINES IN STOCK. 2008 Cummins ISM DPF Diesel Engine, 350HP, Approx. 408K Miles. All Complete and Run Tested. $10,995.00 with Exchange. For Information on this or any other engines. Please Call .