What is TCS on a 2003 Honda Accord?
The traction control system, or TCS, on a 2003 Honda Accord has several functions relative to maintaining constant tire speed and traction. It receives signals from the wheel sensors, the transmission — or its vehicle speed sensor — and the ignition system to formulate its strategy.
How to reset the oil light on a 2003 Honda Accord?
Press the “Select/Reset” knob and hold it. The knob is in the lower-right corner of the instrument cluster. Turn the ignition switch to the “On” position, without starting the car. Continue to hold the knob pushed in for approximately 10 seconds. The “Maintenance Required” light will turn off. Release the knob and turn the ignition off.
Where is the maintenance required indicator on a Honda Accord?
The 2003 Honda Accord is equipped with a “Maintenance Required” indicator located in the top-right corner of the instrument cluster. Its function is to alert you when it’s time to change the Accord’s engine oil.
How does the engine light work on a Honda Accord?
The Honda Accord’s engine management system keeps track of any error codes triggered by any of the connected sensors. When a problem has been detected, the error code is stored in the computer, which prompts the engine light to turn on.
How to troubleshoot the TCS light on a 2003 Honda Accord?
Look for any corroded or disconnected wires. Look over the electrical connectors on the radiator side of the transmission for corrosion and disconnected or loose connectors. Check all the fuses in the fuse and relay box on the driver’s side fender well and replace as necessary.
Press the “Select/Reset” knob and hold it. The knob is in the lower-right corner of the instrument cluster. Turn the ignition switch to the “On” position, without starting the car. Continue to hold the knob pushed in for approximately 10 seconds. The “Maintenance Required” light will turn off. Release the knob and turn the ignition off.
When to reset the maintenance required light on a Honda Accord?
It is set to trip at certain mileage intervals as long as it’s reset when the service is performed. The Accord has been around since 1976, and depending on its year, different procedures are required to reset the light. From the late 1990s until now, the procedure remains the same. Locate the key slot to the left of the maintenance required light.
How do I reset the maintenance required light?
The maintenance required light should be out. Depress and hold the select/reset button on the right of the instrument panel beneath the odometer reading. Insert the ignition key into the ignition while continuing to to hold the select/reset button. Turn the ignition key to the power accessory position.
The Honda Accord’s engine management system keeps track of any error codes triggered by any of the connected sensors. When a problem has been detected, the error code is stored in the computer, which prompts the engine light to turn on.