What is the key sign on Honda Odyssey?
The KEY warning light (red) notifies the user that the engine cannot be started, the remote transmitter is outside of the vehicle, or that there is a malfunction in the system. The light indicates that the system is in FWD and the vehicle should be checked out (as noted in the manual).
When does the key light go off on a Honda Odyssey?
If the proper key is used the light will come on for 2 seconds and go off. If the wrong key is used or code not recognised the light comes on for 2 seconds then will blink until the ignition is turned off.
What does it mean when your Honda Odyssey won’t start?
If the ignition switch is turned off the indicator will blink for 5 seconds to indicate that the imobilizer system has been set correctly then will go off. Large metal objects, key fobs, other imobilizer keys, and other transponders can interfer with the imobilizer signal. If an intermitent program is suspected , remove the key from the key ring.
Why are the VSA lights on on my Honda Odyssey?
Power Sliding Doors Won’t Open! Another annoying side effect of the VSA/ABS lights being illuminated (besides the fact that the important safety features of anti-lock braking and stability assist are disabled), is the two power sliding rear doors on the Odyssey will not open with the engine running.
Why are the traction control lights on on my Honda Odyssey?
2012 Honda Odyssey EX-L – had issue with ABS and TRaction control lights on, door would not open unless ignition off. This procedure with pin 4 and 9 and light braking worked quickly, thanks. Practiced once, got on 2nd try. If not covered by warranty (or Honda claims damage), Honda wanted $280 just to diagnose.
If the proper key is used the light will come on for 2 seconds and go off. If the wrong key is used or code not recognised the light comes on for 2 seconds then will blink until the ignition is turned off.
Where is self diagnostic results Terminal on Honda Odyssey?
To start the self diagnostic results mode, ground the self-diagnostic (check) terminal located on Data Link Connector. The location of the malfunction is indicated by the warning lamp flashing. 1. Drive vehicle over 30 km/h (19 MPH) for at least one minute. 2. Turn ignition switch OFF. 3.
What to do if your Honda Odyssey has a malfunction?
The location of the malfunction is indicated by the warning lamp flashing. 1. Drive vehicle over 30 km/h (19 MPH) for at least one minute. 2. Turn ignition switch OFF. 3. Ground terminal 9 of Data Link Connector with a suitable harness. 4. Turn ignition switch ON while grounding terminal 9.
How do you reset the ABS light on a Honda Odyssey?
1. Drive vehicle over 30 km/h (19 MPH) for at least one minute. 2. Turn ignition switch OFF. 3. Ground terminal 9 of Data Link Connector with a suitable harness. 4. Turn ignition switch ON while grounding terminal 9. Do not depress brake pedal. 5. After 3.0 seconds, the warning lamp starts flashing to indicate the malfunction code No. (See NOTE.)