What kind of engine does a Geo Metro have?
From 1995 through 1997, the Geo metro’s base engine produced 58 pound-feet of torque, while the “high-output” produced 74 pound-feet. When designing the engines for the Metro, the main concern was fuel economy. With the changes the Metro underwent, the fuel mileage change greatly.
What kind of gas mileage does a 1989 Geo Metro get?
With the changes the Metro underwent, the fuel mileage change greatly. The base engines ranged from 30 to 53 mpg in the city and 34 to 58 mpg on the highway. The “high-output” engines got 30 to 46 mpg in the city and 34 to 50 mpg on the highway. MSN Autos: 1989 Geo Metro Engine Specs.
How much torque does a 16V camshaft have?
16v Camshaft Carrier Cap bolts.x12 (must be staged up and down)[GEO spec] 89Geo spec. Valve Cover 8v. (aka: Rocker cover bolts) This is very very small torque, if you exceed this, the tin metal bends, and gasket leaks. 35–44 Valve Cover 16v ( more forgiving this cover, but the 6mm bolts must never be over this number! or they will snap)
How much torque does a troque engine have?
Main bearing cap bolts. Torque: 39 N·m (29lb ft) NOTE: Do not allow the crankshaft to rotate. Crank case Main Bearing side bolt Torque: 39 N·m (29lb ft) Connecting Rod Cap bolts Torque: 54 N·m (40 lb ft). Install main bearing caps, oil gallery and crank case bolts in the order shown, and tighten each bolt to the specified torque.
What are the specifications for an Isuzu troque engine?
Main bearing cap bolts. Torque: 39 N·m (29lb ft) Oil gallery fixing bolts. Main bearing fixing bolts 39 Nm (29 ft. lbs.),General Specifications,Oil Clearance,Standard: 0.019 mm – 0.043 mm (0.0007 inches – 0.0017 inches),Limit: 0.08 mm (0.0031 inches),Ignition coil, Spark plug, Crankshaft position sensor and under cover
Where can I find the latest torque specs?
Find the most up-to-date torque spec listings in electronic format. FelPro-Only.com is your convenient source for advanced sealing information. It’s the place to learn and share “tricks of the trade,” find proper diagnosis and installation instructions, and enjoy easy access to parts reference.
How does the ho2s work in an Isuzu troque?
The HO2S generates a voltage between 0.1 and 0.9 V in response to oxygen in the exhaust gas. If the oxygen in the exhaust gas increases, the air-fuel ratio becomes Lean. If the oxygen in the exhaust gas decreases, the air-fuel ratio becomes Rich.