What RAM does the HP Elite 8200 use?
The HP Compaq 8200 Elite SFF Computer takes the DDR3 PC3-10600 1333MHz, PC3-12800 1600MHz Non-ECC DIMM memory type, and comes installed with 8GB memory.
How do I update the BIOS on my HP Elite 8200?
Select the F10 system setup option. Select the File tab>Flash System ROM command, and then select the USB flash drive. The PC should now ‘see’ the BIOS update files on the flash drive. Follow the onscreen prompts to update the BIOS.
How do I disable Secure Boot on HP Compaq 8200 Elite?
Use the arrow keys to select the Security menu, select Secure Boot Configuration, and then press Enter. Press F10 on the Secure Boot Configuration message to continue. Use the arrow keys to select Disable next to Secure Boot, and then select Enable next to Legacy Support. Press F10 to accept the changes.
Is Secure Boot necessary?
Why configure Secure Boot? This type of hardware restriction protects the operating system from rootkits and other attacks that may not be detected by antivirus software. The Managed Workstation Service recommends configuring your device to support Secure Boot, though it is not required.
What kind of ports does a HP Compaq 8200 have?
HP Compaq 8200 Elite Small Form Factor PC has rear I/O which includes (6) USB 2.0 ports, serial port, PS/2 mouse and keyboard ports, RJ-45 network interface, DisplayPort v1.1a and VGA video interfaces, and 3.5 mm audio in/out jacks. It has Intel Q67 Express chipset. 1.
What kind of ports does the HP 8200 elite Microtower have?
HP Compaq 8200 Elite Microtower PC has rear I/O which includes (6) USB 2.0 ports, serial port, PS/2 mouse and keyboard ports, RJ-45 network interface, DisplayPort v1.1a and VGA video interfaces, and 3.5 mm audio in/out jacks. It has 320 W standard or 90% high efficiency power supply.
How to remove SODIMM from HP Compaq 8200 elite?
Locate the memory module sockets on the system board. To reduce risk of personal injury from hot surfaces, allow the internal system components to cool before touching. To remove a SODIMM, press outward on the two latches on each side of the SODIMM (1) then pull the SODIMM out of the socket (2).