What should I do if my Honda check engine light is not working?

What should I do if my Honda check engine light is not working?

Check to see that all electronics in the vehicle are working properly (e.g. dash light, 12-volt power supply, interior lights). If everything is working properly, I would either test all the fuses (using a test light or a voltage meter is the fastest way to do that) or return the vehicle to the person who did the work. 5.

When does the service engine soon light come on?

If your Check engine light is ON, the easiest way to diagnose this problem is to always check your trouble code memory with an OBD2 scanner. The check engine light will not light up if there is a scheduled service as the service engine soon light. It does only occur when there is a problem with your engine.

What does it mean when your check engine light is on?

Each of those systems have lights of their own. However, these other systems may also set a check engine light, at times. Check engine lights also have multiple states. For instance, a check engine light that is steadily on, means a situation exists that requires service soon.

What are the warning lights on a Honda?

The following are warning lights and indicators found in vehicles built by Honda. Click a link to learn more about each one. They are roughly ordered by importance, which tends to be by color (red, amber, yellow, orange, green, blue, gray).

What makes the Honda check engine light work?

All Honda fuel caps have a ratcheting device built into the cap to achieve a good seal and keep you from over-tightening the cap. When tightening your fuel cap, be sure to turn it enough to hear at least three clicks; that ensures the proper torque was applied.

Can a check engine light be a problem?

If your car is running normally, and you have no problem driving it, the problem is not so severe that you need to panic. Of course you should not ignore the light; it is warning you of some problem with the emissions system.

What does it mean when service engine light comes on?

When the light comes on, a code is stored as the reason for triggering the light. When you take your car in to get it checked out, the mechanic hooks up a little diagnostic computer to your vehicle’s computer. They will then get a code and description that tells them what the issue is.

When to reset the Check Engine light on Honda Civic?

Continue reading to learn how to reset this light and save yourself the dealership cost. This article applies to the Honda Civic (1992-2000), and Accord (1990-2002). The check engine light in your Honda offers important diagnostic information, which will alert you of a serious problem like a bad catalytic converter.

Continue reading to learn how to reset this light and save yourself the dealership cost. This article applies to the Honda Civic (1992-2000), and Accord (1990-2002). The check engine light in your Honda offers important diagnostic information, which will alert you of a serious problem like a bad catalytic converter.

What causes the Check Engine light to turn on?

A number of things can cause the check engine light to turn on. Sometimes it is not caused by a serious problem with your car. Continue reading to learn how to reset this light and save yourself the dealership cost. This article applies to the Honda Civic (1992-2000), and Accord (1990-2002).

Where is the fuse on the Honda check engine light?

Gain access the interior fuse box, which is located to the left of driver’s side dash. Remove the panel cover to access your vehicle’s fuses. Use the fuse panel diagram on the inside cover to determine the location of each individual fuse. Using the fuse puller (or needle nose pliers), remove fuse 7.5A. Wait three minutes, then re-attach the fuse.

Check to see that all electronics in the vehicle are working properly (e.g. dash light, 12-volt power supply, interior lights). If everything is working properly, I would either test all the fuses (using a test light or a voltage meter is the fastest way to do that) or return the vehicle to the person who did the work. 5.

A number of things can cause the check engine light to turn on. Sometimes it is not caused by a serious problem with your car. Continue reading to learn how to reset this light and save yourself the dealership cost. This article applies to the Honda Civic (1992-2000), and Accord (1990-2002).

Gain access the interior fuse box, which is located to the left of driver’s side dash. Remove the panel cover to access your vehicle’s fuses. Use the fuse panel diagram on the inside cover to determine the location of each individual fuse. Using the fuse puller (or needle nose pliers), remove fuse 7.5A. Wait three minutes, then re-attach the fuse.

What’s the best way to reset a check engine light?

In such a case, it is highly recommended to check the codes with a scanner instead. Switching the ignition on and off is also one method of hard reset without disconnecting batteries. Put the keys in your ignition and turn your ignition on and off consecutively after a second in each step.

What does check engine light on Honda CRV mean?

We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car. A check engine light can indicate a broad spectrum of problems with your 2009 Honda CR-V.

Are there any problems with the Honda CRV?

Honda CR-V owners have reported 57 problems related to check engine light on (under the engine and engine cooling category). The most recently reported issues are listed below. Also please check out the statistics and reliability analysis of Honda CR-V based on all problems reported for the CR-V.

What to do if your Honda Civic engine light is on?

1. Getting Started – Prepare for the repair 2. Locate OBD Port – Find the OBD port on your vehicle 3. Scan for Codes – How to scan your vehicle for trouble codes 4. More Info. – Additional information on check engine lights Share on Lake Fordhelped make these videos Feedback Download Honda owners manuals Parts & Tools

Why does my Honda VTEC go into fuel cut mode?

If the pressure switch signal is not logical for the commanded state of the control solenoid, a DTC will set and the PCM will go into a ‘fuel-cut’ mode limiting engine rpm and performance. The PCM simply doesn’t ‘know’ what the state of the intake valves are, so you end up with the symptoms you describe.

When does a car lose power while driving?

Here’s one of the most expression you often encountered in car loses power while driving situation. You often encounter this situation when suddenly running at an unusually high speed. The soot in the combustion chamber fell into the mouth of the valve so it could not be closed, the machine died suddenly.

What causes a car to lose power on a hill?

If the fuel pump is on its way out, it may work intermittently or not at all. A symptom of starving the car for fuel is a car that runs correctly at idle and low load, but falls flat on its face as you ask for more power (when climbing a hill, for instance). Fuel pumps may fail due to age, sediment buildup, or running the incorrect fuel.

What does check engine light on Honda Accord mean?

A check engine light can indicate a broad spectrum of problems with your 2000 Honda Accord. In some cases you need to pull over immediately to prevent damage while in others you merely need to tighten you gas cap next time you stop in order to reset the service engine soon light.

What to do if your engine light is on?

Engine Light Is On: 1998-2002 Honda Accord – What to Do 1. Getting Started – Prepare for the repair 2. Locate OBD Port – Find the OBD port on your vehicle 3. Scan for Codes – How to scan your vehicle for trouble codes 4. More Info. – Additional information on check engine lights Share on Lake Fordhelped make these videos Feedback

What to do if your Honda Accord is leaking oil?

Plug the oil leak If you are leaking oil and parking on your oil spots each night, the oil is breaking down your tires’ rubber 2000 Honda Accord EX 2.3L 4 Cyl. Sedan (4 Door) See all videos for the 2000 Honda Accord

How does auto stop work on a Honda CRV?

The green auto stop indicator light illuminates on the dashboard when the engine has been stopped by the system. The engine will then restart as the vehicle is about to move off and the green light goes out. If your Honda CR-V auto start stop system is not working, it may have developed a fault.

Is the IDLE STOP indicator on a Honda?

It’s new, yes, but Honda have implemented it well and it should just work. You say you get the circled ‘A’ – on its own that means that idle stop is active (there should also be a yellow illuminated symbol on the dash). If there is a problem preventing idle stop the ‘A’ will be crossed through and something else appears alongside.

Why does auto stop not work on Honda Civic?

If the brake pedal is pressed less firmly then the auto-stop won’t work (brake pedal symbol on the multi-function display) which is useful to avoid the engine stopping when getting close to the front of the queue at a roundabout. My experience (manual box) after 3 years of ownership is that cold weather makes the system much less likely to operate.

How to permanently disable Auto Stop Start in Honda?

Start the car. With the engine running, close the hood. The auto stop function will not activate. You will need to do this with each remote fob. To turn auto start on so it can be controlled by the button on the console do the following: With the car running, OPEN the hood. Turn off the engine. Close the hood. Auto stop now works as it should.

What causes Honda Odyssey check engine light to go off?

This is arguably the worst year for the Honda Odyssey with his engine problems. Many drivers experienced engine mount failure, blown spark plugs, problems with the crankshaft breaking camshaft position sensors, oil leaking issues and more. Any of these problems could have led to the check engine light going off.

When does the Check Engine light come on?

Eddie spent 35 years in the automotive business with Honda. He is an ASE Certified Master Technician and has bruised knuckles to prove it. Your “Check Engine” light comes on when your car’s onboard computer (or PCM, Powertrain Control Module) records some kind of problem.

How can I diagnose a Honda transmission problem?

A scanner that can diagnose Honda transmission problems. Here are a few popular choices. These scanners can read and clear fault codes from the transmission module. Locate the OBD-II port under the dashboard. Turn on the ignition. Allow your scanner to turn on. Select your Honda model, then go to the Control Unit.

Why is my Honda transmission whining when I change gears?

Low transmission fluid level can cause the engine to rev up when the automatic transmission changes gears. It can also cause the transmission to bang into gear or whining noise coming from the transmission. How to diagnose Honda transmsion problems? Transmission problems will, in most cases, generate a fault code.

Are there any Honda Genio owners in the Philippines?

Till date, 13 genuine owners have shared their feedback on Honda Genio, of which, 12 users are happy while 1 Motorcycle User (s) choose to remain neutral. Even though the Philippines market is filled with scooters and mopeds that are light and easy to ride. Out of many, the one that I fell in love with is the Honda Genio.

When to go to service centre for Honda generator?

For example, if you’re having Honda EU10i problems, the manual will ask you to check that there’s enough fuel in the tank, oil in the engine, the engine switch is on, etc. If the manual doesn’t resolve your issue, Honda recommends that you get your generator repaired at an Authorised Service Centre.

How tall is the seat height on a Honda Genio?

The seat height is very comfortable for even 5 feet women to ride Read Full Review The Honda Genio is one such scooter that is compact, cute, and practical. I’ve been a great fan of the scooter, ever since it launched in the Philippines and always wanted to own it.

When does the Check Engine light come on in a Honda?

This article applies to the Honda Civic (1992-2000), and Accord (1990-2002). The check engine light in your Honda offers important diagnostic information, which will alert you of a serious problem like a bad catalytic converter. However, the check engine light also appears when the fuel tank cap is loose, or a change in humidity has occurred.

Why is my Check Engine light on in my Bugatti Chiron?

The monstrous Bugatti Chiron has 16. No matter how many you have though, a malfunctioning coil will almost certainly trigger the check engine light, but remember, if your car burns diesel, you have neither ignition coils nor spark plugs.

What causes a water leak in the back of a Honda?

If the water is only visible on the rear carpet, the leak may be in the rear of the vehicle. The most common cause of a water leak is the windshield; sometimes a newly replaced windshield will leak.

Why does my check engine light keep turning on?

On average, a quality O2 sensor will set you back about $175, but the cost of labor will vary greatly depending on the vehicle’s make and model, as well as your geographical location. Finally, keep in mind that most late-model cars have more than one O2 sensor. A loose fuel cap is one of the most common reasons why the check engine light turns on.

Where is the oxygen sensor on a Honda?

The oxygen sensor is located under the vehicle, usually in or near the catalytic converter where the temperature can exceed 600 degrees. If this sounds like your scenario, take your car to the dealer or your local mechanic.

What does the code on the Check Engine light mean?

This onboard computer runs your car so that it has optimum fuel economy and low emissions. The PCM creates a code indicating what part or system is malfuntioning (electrical system, oxygen sensors, and so on). Your tech can get the code from the vehicle and look up its meaning.

Where is the knock sensor on a Honda?

A car knock sensor is located on the intake manifold, cylinder, or engine block. The purpose of the knock sensor is to sense unusual pulsations caused by the engine detonation.

Why is the D light blinking on my Honda Pilot?

D light flashing and engine light on went away for a few hours then it came back on. If you want to avoid the dealer, go to a parts store and get the code read. However if its a Honda specific code, be ready for them to be unable to read. The switches seem to be a known issue and are very easily replaced.

What does the Check Engine light on a knock sensor mean?

If the computer doesn’t recognize a sound, it will illuminate the Check Engine Light. This is true for the knock sensor as well. If the knock sensor detects an abnormality, the computer will let you know with the Check Engine Light.

What should I do if my knock sensor goes off?

If the knock sensor detects an abnormality, the computer will let you know with the Check Engine Light. If the Check Engine Light turns on, have a certified mechanic inspect your vehicle as soon as possible.

What does it mean when your check engine light comes on?

It could be a misfiring engine, a broken oxygen sensor or simply a loose gas cap. When you see the check engine light it doesn’t necessarily mean you need to pull the car over to the side of the road and call a tow truck. It does mean you should get the car checked out as soon as possible.

Where is the oxygen sensor on a Honda Accord?

It’s just possible, though not common, that a technician wiping oil off the sensor damaged it somehow. On this 1991 Honda Accord, you can see how the oxygen sensor (little rat-tailed item) is located directly below the oil filter.

What does a malfunction check engine light mean?

Malfunction Indicator Lamp/Check Engine Light If this indicator comes on while driving, there is a problem with your engine or its emission control systems. Even though you may feel no difference in your car’s per- formance, it can reduce your fuel economy and cause your car to put out excessive emissions.

What to do if your engine indicator light comes on?

Continued operation may cause serious engine damage. If this indicator light comes on, safely pull off the road and turn off the engine. Restart the engine and watch the indicator light. If it stays on, have your car checked by the dealer as soon as possible. Drive moderately until the dealer has inspected the problem.

Where to find diagnostic code for Acura check engine light?

1. Connect scan tool to the 16-pin data link connector (DLC) located underneath the glove compartment. The connector has a removable cover. 2. Turn the ignition on. 3. Follow scan tool manufacturer’s operating instructions to access the Diagnostic Trouble Codes (DTC’s).

What happens when the Check Engine light comes on?

Of course you should not ignore the light; it is warning you of some problem with the emissions system. When the light is on, your car runs on default parameters, not optimized to reduce emissions and increase mileage, and so you won’t get the gas mileage the car is designed to get.

If the water is only visible on the rear carpet, the leak may be in the rear of the vehicle. The most common cause of a water leak is the windshield; sometimes a newly replaced windshield will leak.

Of course you should not ignore the light; it is warning you of some problem with the emissions system. When the light is on, your car runs on default parameters, not optimized to reduce emissions and increase mileage, and so you won’t get the gas mileage the car is designed to get.

It’s just possible, though not common, that a technician wiping oil off the sensor damaged it somehow. On this 1991 Honda Accord, you can see how the oxygen sensor (little rat-tailed item) is located directly below the oil filter.

Why does my Honda engine not rev up?

EASY FIX ON HONDA AND ACURA VEHICLES. – YouTube ENGINE WILL NOT REV UP PAST 2000 RPM ? EASY FIX ON HONDA AND ACURA VEHICLES. If playback doesn’t begin shortly, try restarting your device.

When does the Check Engine light turn on?

The orange, engine-shaped icon on your car dashboard’s instrument cluster is programmed to turn on when the vehicle’s electronic brain detects something is wrong.

EASY FIX ON HONDA AND ACURA VEHICLES. – YouTube ENGINE WILL NOT REV UP PAST 2000 RPM ? EASY FIX ON HONDA AND ACURA VEHICLES. If playback doesn’t begin shortly, try restarting your device.

What does 3, 000 rpm do to a car?

At exactly 3,000 RPM, it is like the car hits a rev-limiter. The car will NOT accelerate beyond 3,000 RPM. Even in park/neutral, you can rev it up and watch the RPM needle bounce off of the 3,000 RPM mark.

How to get the Check Engine light on a Honda?

Honda Check Engine Light Codes 1 Connect SCS service connector special tool No. 07PAZ-0010100, or equivalent, to service check connector located under the passenger’s side of dash. 2 Turn the ignition on. 3 MIL will indicate DTC’s by outputting a number of flashes.

When does the Honda Minder light come on?

Q: Typically my Honda Maintenance Minder light comes on at 6,500 miles,but I am only at 4,500 miles and I am going on vacation. I want to have my service completed before I go.

What do you need to know about Honda maintenance minder?

A: Honda recommends that you follow your Maintenance Minder. If you do choose to maintenance your vehicle early, be sure that the Maintenance Minder light is reset, keeping the main-codes and sub-codes synchronized. Q: The Honda Maintenance Minder is telling me I need a ‘B’ Service.

What happens when you put a Honda Accord in gear?

If a 2002 Honda Accord make nosies when you put it in gear and won’t move. 51 people found this helpful. My Honda Did The Same Thing ! But When I Restared The Car Everytime The Tranny Stopped Working It Would Start Working Again ! I Be On The Freeway From D4 To Neutral And Turned Off Engine Back To D4 And Tranny Starts Up Fine !

What does the Check Engine light mean on a Honda?

The check engine light is a light that the engine computer uses to signify that there is something wrong. They are orange, amber, or yellow, and not to be ignored! The only way to “reset” the check engine light is by fixing the problem causing it. Thus, the 10 reasons I list below may help you reset your check engine light.

Are there any problems with the Honda Odyssey?

Despite being an extremely popular car brand, Honda has experienced numerous problems with their Odyssey model. Throughout the years, the Honda Odyssey has experienced transmission problems in many of their cars, with a more prevalent problem during the years of 1999-2004.

When did Honda start making the Honda Odyssey?

The timeline of the Honda Odyssey Transmission Problems can be seen since the early on in the company’s history. Honda began marketing and manufacturing the Odyssey in 1994, creating a smaller minivan for the middle class market. Since 1999, Honda has made a bigger version of the Odyssey in North America to fit bigger families and more items.

What is the code for the Honda check engine light?

A long flash (or approximately one second) equals 10. A short code (or approximately half a second) equals one. For example, two long flashes followed by two short flashes will equal to the code 22. Any subsequent codes will follow in 2.5 second intervals.

What should I do if my check engine light comes on?

Eddie spent 35 years in the automotive business with Honda. He is an ASE Certified Master Technician and has bruised knuckles to prove it. What should you do if your check engine light comes on?

Is it possible to reset an engine warning light?

While the documentation for some older cars provided instructions on how to check and reset engine warning lights, it’s not usually possible now cars have grown more sophisticated. It’s well worth paying for accurate diagnosis, though, so a proper and effective repair can be made.

Why is my Check Engine light still on after filling up?

The cap is a crucial part of a car’s fuel delivery system. It notably prevents gasoline fumes from leaving the fuel tank, and it helps keep the whole system under the correct pressure. If your check engine light turns on immediately after a fill-up, pull over and make sure the cap isn’t loose — or still on your car’s roof.

How to check if Honda CRV malfunction indicator lamp is set?

To check if they are set, turn the ignition switch to the ON (II) position, without starting the engine. The malfunction indicator lamp will come on for 20 seconds. If it then goes off, the readiness codes are set.

While the documentation for some older cars provided instructions on how to check and reset engine warning lights, it’s not usually possible now cars have grown more sophisticated. It’s well worth paying for accurate diagnosis, though, so a proper and effective repair can be made.

What happens to readiness code on Honda CRV?

Your vehicle has certain ‘‘readiness codes’’ that are part of the on-board diagnostics for the emissions systems. In some states, part of the emissions testing is to make sure these codes are set. If they are not set, the test cannot be completed. If the battery in your vehicle has been disconnected or gone dead, these codesmay be erased.

How many miles does a 2006 Honda Pilot have?

I love my Honda Pilot !!! Purchased a used 2006 Honda Pilot EX, 3.5L, V6, 5-spd, 54,000 miles in 2012. My first Honda EVER after owning GM/Ford products.

When does the Check Engine light come on and go off?

The check engine light often comes on and goes off after a while. Any time I notice it whiles driving, I park and close the fuel tank well but the light doesn’t go off. Sometimes I restart the car but it still won’t go off. It goes off on it own and comes back after some time.

Where is the Check Engine light on a Honda?

Turn the key into the “off” position if either of these occurs. Figure 1. A steady check engine light. (Related Article: Warning Lights – Honda-Tech.com) In the passenger’s side foot well, remove the kick panel by the side door. This will allow you access to the Engine Control Unit (ECU) and jumper plug (service connector).

How can I get my Check Engine light to go off?

One of the possible ways of getting your check engine light to go off is pulling off the engine control unit’s fuse and then putting it back again. Although this won’t solve the problem in newer cars, it may solve the problem in a little bit older cars, and it is easy to try. Check your repair manual to find the fuse to the engine control unit.

On average, a quality O2 sensor will set you back about $175, but the cost of labor will vary greatly depending on the vehicle’s make and model, as well as your geographical location. Finally, keep in mind that most late-model cars have more than one O2 sensor. A loose fuel cap is one of the most common reasons why the check engine light turns on.

Why does my check engine light keep coming on?

A code reader can help you by manually allowing you to clear the fault code that has caused the check engine light to illuminate (in case it was stuck on due to an error in the car’s computer), or if there truly is something mechanically wrong then it can give you the “error code” that your car is producing.

How to reset the ” Check Engine ” light?

4 Ways to Reset the “Check Engine” Light Method Tools Required 1. Drive your car and let light go off b None 2. Turn the engine on and off three time None 3. Disconnect and reconnect the battery. Wrench 4. Use an OBD code reader. Wrench and OBD reader

What does the Check Engine light of your civic mean?

Its function is to alert the driver about any type of engine problems. While driving, the computer of your Civic (ECU o PCM) monitors air/fuel supply and exhaust gases in order to verify that the engine is working properly.

Where is the reset button on an old car?

For old models (2002 to 2006), the reset button can be found in the emergency brake handle’s front cabin. Turn on the ignition but don’t start the car and press the reset button until the yellow indicator on the dashboard starts blinking. The TPS will be automatically calibrated on your next drive.

How do I Turn on my Honda remote?

Step 3: Turn the key to the ON position, one click before starting the ignition. The lights on the accessories should come on and the dash will light up. Step 4: Within 5 second of turning the key to the ON position, press the LOCK button on your remote control transmitter for one second.

How do you start a Honda CRV key fob?

Get inside, bring the fob near the start button. Car will detect the passive RFID signature of the keyfob and light the LED up on the push button. Press to start the car. That was my fear when I got a Canadian LE Corolla with smart key in ’09. Even carried a spare battery in m wallet for just in case. Todate it never failed.

How can I program remote keyless entry into my Honda?

Within 4 seconds: Press LOCK button or UNLOCK button of first remote transmitter. System should now lock and unlock vehicle to indicate remote programming mode activated. Press LOCK button or UNLOCK button of first remote transmitter, allowing doors to lock and unlock once.

How do you remove a dead battery from a Honda key fob?

Open your Honda Key Fob If your keyless entry remote has a screw, remove it using a jeweler’s screwdriver. Separate the two halves of your remote using a small flathead screwdriver. Exert gentle pressure to avoid damaging the key. 3. Remove the Dead Battery

Why does the engine warning light go out?

On engine startup, the warning light will illuminate for a second or two to check the bulb and should then go out. If the warning light is illuminated even after startup, it indicates that the car’s computer has detected an issue within the system.

What causes a Honda outboard engine to overheat?

One possible cause of an overheated engine is a clogged water intake port. This can be remedied simply by cleaning the water intake port, which is located slightly above the propeller. An overheated engine can also be caused by a spark plug that has an improper heat range.

The following are warning lights and indicators found in vehicles built by Honda. Click a link to learn more about each one. They are roughly ordered by importance, which tends to be by color (red, amber, yellow, orange, green, blue, gray).

Why does my Honda Accord turn itself off?

1997 to 1999 Accords have a known problem with their ignition switch, which causes your cluster to die at the same time your engine cuts out. This is likely a power supply problem, and the car will turn itself off sporadically. For these Accord model years, a recall is in effect. Contact a dealership to have the ignition switch replaced.

Why does my check engine light go off at night?

kwangmoo/123rf. An aftermarket alarm can wreak havoc on your car if it’s not installed properly. It can drain the battery, trigger the check engine light, or even prevent the vehicle from starting. Then, when you least expect it, it’ll go off in the middle of the night because a leaf from an oak tree fell on the hood.

What to do if you have a Honda recall?

For additional recall assistance, click the Ask Dave by Honda button. If you are dissatisfied with your vehicle performance or have a product complaint, please contact Honda Automobile Customer Service at (800) 999-1009.

When do I get what I got in my hear its Gonna Be You?

“When someone get what I got in my hear its gonna be you, its gonna be you. When someone get all the love that I’ve gotten, its gonna be you its gonna be you. Oh honey isn’t it funny isn’t funny what lover can do.

Is there a problem with my Honda Civic?

Here’s a clue: With wireless technology comes a bit of a learning curb for 10th Generation Honda Civic owners. Is your car’s electronic system glitchy? Or is it simply a case of user awareness, or a lack of it.

Who is the Honda dealer at Patty Peck?

My experience at Patty Peck was awesome,from the moment I spoke with Richie Jones on the phone until the moment I meet him at the dealership.He was very professional and he made sure I was comfortable with the vehicle of my choose .Mr. Richie Jone I will do business again with you in the near future.Thanks again No appointments necessary.

How to repair a Honda in Battle Creek MI?

Battle Creek Honda’s car repair experts will diagnose your vehicle’s problem accurately and make your auto repairs quickly. Schedule Honda car repair in Battle Creek by completing our online auto service and parts form. Or contact the service department at (888)748-6347.