What to do if your Honda has a p1009 code?

A stretched timing chain or damaged tensioner can also set the P1009 code. Before replacing the timing chain or tensioner, check engine oil level and condition. Replaced engine oil and filter with the factory recommended oil weight if necessary. The cost to diagnose the P1009 HONDA code is 1.0 hour of labor.

What does variable valve timing control on Honda p1009 mean?

P1009 Honda Meaning. The variable valve timing control (VTC) system controls the phase of the intake camshaft. It uses oil pressure to operate the VTC actuator so the valve timing is optimized depending on driving conditions.

What does c1201 code on Check Engine light mean?

Either an improperly installed cap or a worn out one. The C1201 code is the one that tells the vehicle to turn on the check engine light and disable the traction and VSC. Basically, when the other two codes pop up, this one is in charge of letting you know there’s a problem.

How to get rid of check engine light error?

Then put your key into the ignition and turn it three times to the “ON” position. This will clear the emissions data from the vehicle memory as well as the readiness flag data. Reconnect the positive battery cable and turn the key in the vehicle ignition. Wait one minute and the check engine light error should be gone. 4. Use an OBD Code Reader

What to do if check engine light is on but no code?

Check the make and model of your reader to see what it is built for and if all else fails, head into a parts store and they should be able to read the issue at no cost to you. No code being generated on the reader does not mean the driver is in the clear.

Why does the Check Engine light keep blinking?

When the ECU ( engine control unit) detects a problem that it is unable to regulate, it then turns on the check engine light on your dashboard. This check light will either keep on glowing or will blink, depending on the nature of the fault. If the engine check is on regularly then it means that there is a problem but not an emergency.

How does the Honda Accord p1009 VTC work?

It works by using oil pressure to hydraulically move the camshaft. This allows the engine to have more power and efficiency across the RPM range. When P1009 is present, the VTC actuator is not changing the camshaft timing anymore, which leaves the engine with a more aggressive cam profile at lower RPM.

What does DTC stand for in p1009 code?

If an over-advanced camshaft phase (compared to the directed value) continues or when the camshaft phase is otherwise abnormal, a malfunction is detected and a DTC is stored. Need more information on how to fix the P1009 code?

Why is my Honda Accord p1009 not working?

There is no information for a P1009 on a 2007 Honda Accord but that is the readout from the device. Unfortunately we don’t have all model yet, but the information above is the same for the 2007 Honda Accord as well. The Valve Timing Control (VTC) Solenoid is the most likely cause of the problem.

What does VTC mean on a Honda p1009?

P1009 HONDA Meaning The variable valve timing control (VTC) system controls the phase of the intake camshaft. It uses oil pressure to operate the VTC actuator so the valve timing is optimized depending on driving conditions.

Why does my Honda CRV have a p1009 code?

An stretched timing chain or damaged tensioner can also caused triggered the P1009 code. Before replacing timing chain or tensioner, check engine oil level and condition. Replaced engine oil and filter with factory recommend oil weight if necessary. There is a factory service bulletin for the following Honda Models: 2005–2008 Honda CR-V

What are the diagnostic codes for the Honda Element?

P0039 Turbo/super charger bypass valve control circuit range/performance P0040 Upstream oxygen sensors swapped from bank to bank P0041 Downstream oxygen sensors swapped from bank to bank P0042 HO2S heater control circuit (Bank 1 Sensor 3) P0043 HO2S heater control circuit low (Bank 1 Sensor 3)

What does p0041 mean on a Honda Element?

P0041 Downstream oxygen sensors swapped from bank to bank P0042 HO2S heater control circuit (Bank 1 Sensor 3) P0043 HO2S heater control circuit low (Bank 1 Sensor 3) P0044 HO2S heater control circuit high (Bank 1 Sensor 3)

What is the diagnostic code for a Honda check engine light?

Refer to our Generic OBD II code list for definitions on all other Honda diagnostic trouble codes. P1201 Cylinder 1 Misfire – Compare possible causes/symptoms for this Honda check engine light code to the Generic OBD II code P0301

How does the engine light work on a Honda Accord?

The Honda Accord’s engine management system keeps track of any error codes triggered by any of the connected sensors. When a problem has been detected, the error code is stored in the computer, which prompts the engine light to turn on.

What’s the code for the Honda Accord p1009?

The car sputtered and shook for a couple seconds, engine light came on. It seemed to run fine after that, however whenever the rad fans would turn on the engine made a distinct “clunk”. I checked the code readwr and got the p1009 code.

What are the possible causes of a Honda p1009?

P1009 HONDA Possible Causes 1 Engine oil level 2 Dirty engine oil 3 Check VTC Strainer for blockage 4 Faulty VTC Oil Control Solenoid or circuit 5 Faulty VTC Actuator 6 Engine mechanical problems

What to do if your Honda VTC says p1009?

Honda says to clear the code then recheck to see if it comes back. Since it did for you, the next check is to see if the strainer for the VTC is clogged. If so, clean it out and do an oil change. You can also check the VTC passages. Sometimes P0341 can happen at the same time as P1009.

What should I do if my Honda Civic won’t start?

The check engine light will likely appear if your car won’t start. If the engine won’t turn over, or if there’s no sound from the starter when turning the key, the battery is likely dead. The easy way to test the car battery is with a multimeter. Connect the multimeter to the positive and negative battery terminials.

What causes a Honda Civic to have no spark?

This is a pretty simple test. You can find the ignition coil and ignition control module (igniter) test here: How To Test The Igniter, Ignition Coil Accord, Civic, CRV, and Odyssey. Check that the timing belt is not broken. A broken timing belt will cause a no spark no start condition.

How much does it cost to diagnose a p1009 code?

The cost to diagnose the P1009 code is 1.0 hour of labor. The auto repair’s diagnosis time and labor rates vary by location, vehicle’s make and model, and even your engine type.

Why does my Honda engine have a p1009 code?

Here’s how to fix a P1009 or P2646 code for a stuck camshaft position on a Honda i-VTEC engine. The P1009 code is often caused by a sticking Variable Timing Control valve. The VTC valve is responsible for controlling the intake camshaft timing. It is located on the passenger side of the engine.

The cost to diagnose the P1009 code is 1.0 hour of labor. The auto repair’s diagnosis time and labor rates vary by location, vehicle’s make and model, and even your engine type.

What does a P1000 engine code mean?

This code means that the Powertrain Control Module (PCM) didn’t complete a full diagnose cycle, and is set when the battery have been disconnected, codes have been cleared or sometimes even when the vehicle have been towed.

What does the code p0174 mean on a VW?

Code P0174 applies to V engines as they will have two banks, Bank 1 and Bank 2. When the code says that the Fuel System is “too lean,” it means that the computer has been adding more and more fuel, which is called Long Term Fuel Trim.

What does p0101 diagnostic trouble code ( DTC ) mean?

Basically this P0101 diagnostic trouble code (DTC) means that there is a problem with the Mass Air Flow (MAF) sensor or circuit. The PCM detects that the actual MAF sensor frequency signal is not within a predetermined expected range of the calculated MAF value. Note: Some MAF sensors also incorporate an air temperature sensor,…

What to do if you get a p1006 code?

Start by checking the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. The cost to diagnose the P1006 code is 1.0 hour of labor.

Why is my p0101 trouble code not working?

Oil can transfer to the fine wire or film inside the MAF sensor and contaminate it. Use something such as MAF cleaner spray to clean the MAF in such situations. This video is not produced by us, it is here as an aid in resolving your P0101 trouble code (DTC). If playback doesn’t begin shortly, try restarting your device.

What is the code for a 2004 Honda Accord?

2004 Honda Accord 2.4 ltr p1009 code. I replaced the Spool solenoid filter screen and theVTC filter screen and checked the VTC electrically. VTC works properly. High mileage car. Is my chain stretched…

What causes a Honda Accord to stop running?

have a 2007 honda accord it stop running engien turns but wont start .have codes #p1009, p0102, p0113, p0141 Either the Mass Air Flow (MAF) sensor (code P0102) or a problem with the timing belt (P1009) could cause the no start problem. Read more: http://engine-codes.com/p01… Read more: http://engine-codes.com/p01…

What does the p1009 code on a Honda Accord mean?

When P1009 is present, the VTC actuator is not changing the camshaft timing anymore, which leaves the engine with a more aggressive cam profile at lower RPM. P1009 is not the most difficult code to diagnose, since the VTC actuator is not that hard to get to on most Accord’s.

How much does it cost to repair a p1009 Honda?

The cost of diagnosing the P1009 HONDA code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.

Navigation