Why does my truck make a grinding noise?
Clancy, tried your suggestion this afternoon and the truck does not buck or shudder, just the normal 4WD feeling when the front is locked with the rear. Stumpuller6.5 Shits gonna get Abrasive…
What’s the low range setting on a GMC?
GMC models equipped with a two-speed transfer case also include a four-wheel drive setting known as “low range.”
Why does my transfer case make a grinding noise?
Transfer Case grinding noise – FIXED! Discussion in ‘ Mechanic’s Corner ‘ started by stadt11, May 23, 2010 . My transfer case has started making a horrible grinding noise. First I thought it was coming from the driveshaft or the front/rear diff, but wasn’t sure.
Why does my GMC Yukon have 4 wheel drive?
Due to minor tire size differences and track length differences when turning, the front and rear axles can ‘fight’ against each other on high-friction surfaces and results in a condition sometimes known as ‘crow hop’ as tires are forced to slip to the ground.
The fronts you just need to undo the bolts for the wheel bearing which is only 3 bolts and you can slide the dust shield out. Unless you go off roading there really isnt much point to having them on. I was about to take mine off the truck until I found it was the rotors just having a build up at the edge that was rubbing.
Transfer Case grinding noise – FIXED! Discussion in ‘ Mechanic’s Corner ‘ started by stadt11, May 23, 2010 . My transfer case has started making a horrible grinding noise. First I thought it was coming from the driveshaft or the front/rear diff, but wasn’t sure.
What causes a clunking noise on the driveline?
Cause: Bad wheel bearings Noise: Driveline squeaking or grinding at any speed Cause:Worn or damaged U-joints Noise: Clunking when depressing the throttle pedal (takeoff) Cause:Worn U-joints; worn spider gears; worn axle splines; excessive gear backlash; loose yoke splines; worn slip yoke splines Noise:Clunk immediately after taking off from a stop
What makes a car make a whirling noise when accelerating?
Cause: Loose pinion bearingpreload Noise: Howl with whir or rumble while accelerating at any speed (gears previously quiet) Cause:Worn rear pinion bearing or worn gear set Noise:Howl without whir or rumble while accelerating at any speed (gears previously quiet) Cause:Worn gear set due to lack of lubrication or overloading
What kind of noise does a trailblazer make?
I experienced this after I had front brakes put on. Basically when turning to the right, you can hear a patternized grinding (kinda like the sound of a sword being drawn from the sheath). I just jacked the front end up, then turn the wheel then spun the tire to see where it was coming from.
Why is my Chevy Trailblazer making a squeaking noise?
My 2002 Trail Blazer has developed a squeak. It is affected by outside temp and weather. It is intermitted but more prevelant in cooler weather. I have taken it to the Chevrolet Dealer four times to resolve it but to now avail. So far we have replaced bushing, tie rods, and the front end bumper.
Why does my Chevy Trailblazer not move forward?
The suv, will not move forward at onset, even with foot off the brake peddle. recently had an partial, [4] corner’s brake repairs, re rust cleaning, for $6-800. depending on your currency, this all at 22,000 kilometers. But for several mos. the brakes have been ok, Curious if any similiarty, mine occured only yesterday.
The fronts you just need to undo the bolts for the wheel bearing which is only 3 bolts and you can slide the dust shield out. Unless you go off roading there really isnt much point to having them on. I was about to take mine off the truck until I found it was the rotors just having a build up at the edge that was rubbing.
Clancy, tried your suggestion this afternoon and the truck does not buck or shudder, just the normal 4WD feeling when the front is locked with the rear. Stumpuller6.5 Shits gonna get Abrasive…
Why does my car make a whining noise when I shift gears?
If you hear a constant whining noise, accompanied by a slip in the gears as the transmission automatically shifts, it points to low transmission fluids.
What causes a howling noise in the rear of a car?
Cause:Worn rear pinion bearing or worn gear set Noise:Howl without whir or rumble while accelerating at any speed (gears previously quiet) Cause:Worn gear set due to lack of lubrication or overloading Noise:Howling while accelerating over a small speed range (gears previously quiet) Cause:Worn gear set due to lack of lubrication or overloading
Can you really hear the transfer case grinding noise?
In the first video, you can really hear it start as soon as I put it in gear (@ 5sec), and then I rev up the engine and let off and can really hear it (@ 30sec) – this is how it sounds running down the highway about 50-60mph. I put it into 4WD (@ 1min) just to verify it’s not just doing it in 2WD and it’s doing it in 4WD as well.