Why is my CMBS light on?
When CMBS activates its automatic brake, it also turns the brake lights on. When your speed is above 10 mph (15 km/h), the CMBS radar sensor in the front grille can sense a vehicle ahead of you.
What does check CMBS system mean?
When the system shuts off, the CMBS indicator in the instrument panel comes on, and a CHECK CMBS SYSTEM message appears on the multi-information display for about 5 seconds. An abnormal tire condition is detected (wrong tire size, flat tire, etc.). Extended off-road or mountainous driving.
How do you turn off collision mitigation?
To turn off CMBS, simply press and hold down the CMBS button (located to the left of the steering column) until you hear an audible beep and a message appears in the Multi-Information Display. The CMBS will remain deactivated until the engine is shut down.
How do I disable CMBS Acura MDX?
To turn CMBS off, press and hold the CMBS OFF button for 2 seconds – located on the panel to the left of the steering wheel. The system will beep and message will appear in the MID: Collision Mitigation Braking System OFF. Press and hold the button again to turn the system back on.
What is CMBS on Acura MDX?
Collision Mitigation Braking System (CMBS) alerts you to a potential collision and can reduce collision forces if one becomes unavoidable. The goal of CMBS is to alert you to apply the brakes. There’s a host of driver assistance and safety technologies included with every Acura vehicle.
What is CMBS problem?
These systems include lane keeping, steering inputs, adaptive cruise control and automatic braking. However, the CMBS allegedly gives drivers false alarms and randomly triggers the brakes, even when no obstacles are in front of the vehicles. The lawsuit alleges that Honda knew about this problem since at least 2015.
How do you turn off the auto brake on Acura MDX?
If you want to turn off automatic brake hold while the system is in operation, press the automatic brake hold button with the brake pedal depressed. Whether the system is on, or the system is activated, the automatic brake hold turns off once the engine is off.
How do I turn on CMBS Acura?
To turn CMBS on or off, press the CMBS OFF button located to the left of the steering wheel for about one second.
How does Acura CMBS work?
Powered by a combination of radar transmitter and forward-facing camera, the CMBS™ determines the distance and closing speed of detected objects that lie directly ahead. When the system recommends braking, it will issue an audible alert and flash an orange “Brake” warning on the Multi-Information Display.
How do I enable CMBS?
∎ Turning CMBS On or Off Press the safety support switch and roll the left selector wheel to the CMBS symbol and select it. A a message appears in the driver information interface. The CMBS indicator appears when the system is off.
What is MDX LDW?
Lane Departure Warning (LDW)* If your vehicle is getting too close to detected left or right side lane markings without a turn signal activated, the system provides visual and tactile alerts. A Lane Departure message appears on the MID, and the steering wheel vibrates.