Why is there a check fuel cap message on my Honda CRV?
The ‘‘CHECK FUEL CAP’’ message will appear each time you restart the engine until the system turns the message off. If the system still detects a leak in your vehicle’s evaporative emissions system, the malfunction indicator lamp (MIL) comes on.
When does the check fuel cap message go off?
The message should go off after several days of normal driving once you tighten or replace the fuel fill cap. To scroll to another display, press the select/reset knob. The ‘‘CHECK FUEL CAP’’ message will appear each time you restart the engine until the system turns the message off.
How often should I change the fuel fill cap?
Turn the engine off, and confirm the fuel fill cap is installed. If it is, loosen it, then retighten it until it clicks at least once. The message should go off after several days of normal driving once you tighten or replace the fuel fill cap.
Why does my Honda CRV say check fuel cap?
Your fuel tank is part of your CR-V’s larger Evaporative Emissions Control (EVAP) System. There is a certain amount of pressure in the tank. This pressure is secured by the fuel cap. Your Honda’s computer will throw the “Check Fuel Cap” warning when it detects that the pressure has changed enough that it’s likely that there is a gas cap leak.
How can I tell if my fuel cap is loose?
Your vehicle’s onboard diagnostic system will detect a loose or missing fuel fill cap as an evaporative system leak. The first time a leak is detected a ‘‘CHECK FUEL CAP’’ message appears on the information display. Turn the engine off, and confirm the fuel fill cap is installed.
Turn the engine off, and confirm the fuel fill cap is installed. If it is, loosen it, then retighten it until it clicks at least once. The message should go off after several days of normal driving once you tighten or replace the fuel fill cap.
What causes a Honda check engine light to come on?
The most common cause of a Honda check engine light being on is a DTC P1456, and a loose or missing gas cap usually causes the problem. The loose gas cap isn’t the only reason, though. A leak on the evaporative system’s tank side causes the code or DTC 1456 to display in the computer’s data list.
What to do if your gas cap is loose?
If your gas cap is not properly attached, you may see a “Check Engine” light or a “Loose Cap” warning light on the dash. You can either tighten the cap and wait for the system to reset itself when it determines the problem is fixed, or you can use an OBD-II code scanner to manually reset the system. Turn off your vehicle’s engine.
The most common cause of a Honda check engine light being on is a DTC P1456, and a loose or missing gas cap usually causes the problem. The loose gas cap isn’t the only reason, though. A leak on the evaporative system’s tank side causes the code or DTC 1456 to display in the computer’s data list.
If your gas cap is not properly attached, you may see a “Check Engine” light or a “Loose Cap” warning light on the dash. You can either tighten the cap and wait for the system to reset itself when it determines the problem is fixed, or you can use an OBD-II code scanner to manually reset the system. Turn off your vehicle’s engine.