Will removing baffles hurt my 2017 Harley?
If your bike is stock the way it came from the factory it is already running very lean. If you remove the baffles or add a free flowing air filter it will run even leaner. You could add a fueler to richen up the air fuel ratio. The new Gen3 will be easy to install and adjustable for any future mods you might make.
What happens when you remove the baffles on a Harley Davidson?
Removing baffles only makes you think the bike is running better because it’s noisier. In reality, if you were to measure the power, you would find it’s down from where it was with baffles installed and the mixture would be leaned out from where it was which is the main problem.
What happens when you take baffles out of exhaust?
Removing the baffles increases the loudness of your exhaust, will reduce torque and may slightly increase top end horsepower. If you decide to remove the baffles here is how to achieve it.
Is it OK to take the baffles out of a bike?
You may even begin to feel that the bike was peppier before you took the baffles out. You’d be right. You may feel the urge to blip the throttle at stoplights just to set things straight. Resist this urge. Everyone in the immediate vicinity already knows the damn bike is loud. You may think “Ah ha! Loud pipes save lives!” Don’t bother.
Is it better to remove the baffles on a V-twin?
Your performance will, however, noticibly suffer. You might be better off using what you have and start up the piggy bank for a better muffler that will give you some appreciable volume but better performance as well. It will be a whole lot louder (twist the throttle back while going under an interstate overpass and you’ll see what I mean).
How to remove baffles from a Harley Softail exhaust?
If you decide to remove the baffles here is how to achieve it. Chuck a 1 3/4 inch doorknob hole saw to an electric drill. The doorknob hole saw should have an integral pilot hole drill bit.
What happens when you remove the baffles on a bike?
Removing baffles only makes you think the bike is running better because it’s noisier. In reality, if you were to measure the power, you would find it’s down from where it was with baffles installed and the mixture would be leaned out from where it was which is the main problem. We’re talking a street bike here and not a race bike. My experience.
Where to get the best Harley Davidson baffles?
Check out Big City Thunder. They have all types of baffles that will give you the desired sound as well as the needed back pressure.
What would need to be done if I simply removed the baffels from stock exhaust pipes?
What would need to be done if I simply removed the baffels from stock exhaust pipes? Click to expand… If your bike is stock the way it came from the factory it is already running very lean. If you remove the baffles or add a free flowing air filter it will run even leaner. You could add a fueler to richen up the air fuel ratio.