How do I find my gear axle ratio?
Here are two ways to find the axle gear ratio of a vehicle: Method 1: Count the number of teeth on the ring gear and the pinion. Divide the number of the ring gear’s teeth by the number of the pinion’s teeth. This will give you the axle ratio.
What gear ratio does Toyota Tundra have?
To handle the torque of Tundra’s i-FORCE 5.7L V8, our engineers fitted the rear differential with a massive 10.5-in. ring gear. This allows use of an aggressive 4.30 rear axle ratio to help amplify and transfer to the ground the 401 lb. -ft.
How do you find the rotating gear ratio on a tire?
Turn the wheel TWO revolutions and count the number of driveshaft turns. The number of driveshaft rotations will help you determine your rear axle ratio. For example, if it turned 3 and a half times, it’s a 3.50:1 ratio. If it turned 4 and a quarter times, it’s a 4.25:1 ratio.
How can I tell what gear ratio I have without pulling cover?
So an easy way to determine your actual gear ratio is to check the tag attached to the differential cover by the cover bolts. On the tag there should be some numbering such as 3.54 or 3.73, either of those numbers will give you the stock axle ratio.
How do I tell what gear ratio my Ram 2500 has?
Rotate the tire while counting the number of teeth in the large ring gear. Do the same for the small pinion gear in the front of the ring gear. Divide the smaller number into the larger number. This is the gear ratio.
Is a Tundra a half ton?
The Nissan Titan and Toyota Tundra also qualify as half-ton pickup trucks. At the top of the scale are one-ton pickup trucks, like the Ford Super Duty F-350, Ram 3500, Chevrolet Silverado 3500 and GMC Sierra 3500.
How to find gear ratio on differential?
To find the gear ratio, divide the big number by the little number. In the example to the left, 37 ÷ 12 = 3.083333. These are 3.08 gears. If you can’t find a stamping or it is unreadable.
What are the gear ratios on a Toyota Tundra?
Toyota techstream wont read data list AFE super stock intake system How to: Throttle Body Coolant Bypass with Ball Valve Regearing Package Exhaust hardware? Gear ratios and transmission specs. Discussion in ‘ Performance and Tuning ‘ started by Mountun Goat, Apr 4, 2018 . It’s a Goat.
Which is better Toyota F150 or Toyota Tundra?
Even the old 6 speed F150 has a better overall gear ratio in 1st gear with only a 3.55 axle ratio (4.141 x 3.55 = 14.81) than the Toyota with 4.30’s (3.333 x 4.30 = 14.33). Now that the F150 has the 10 speeds its not even close, even 3.15 axle gears in the F150 have a greater gearing advantage.
How many lug wheels does a Toyota Tundra have?
F150’s before 2015 all had 6 lug wheels UNLESS you special ordered the HD Payload Package. Then you did get 7 lug wheels along with a 8200 lb GVWR and north of 2300 lbs of payload in a crew cab 4×4. What GVWR and payload capacity does a 4×4 crew cab tundra have? 3.