How do I fix error code P0013?
What repairs can fix the P0013 code?
- Resetting the fault codes and performing a road test.
- Repairing or replacing the wiring to the exhaust camshaft oil control valve for bank 1.
- Replacing the camshaft oil control valve for bank 1 exhaust camshaft.
- Replacing the ECM.
Is it safe to drive with P0013 code?
While you can drive with a P0013 code for a short period, it’s best to repair it as soon as possible. If you have to wait for repairs, it’s best to drive the vehicle as little as possible. The longer it takes for repairs, the worse the problem will become, and the more likely that severe engine damage will occur.
Can low oil cause P0013?
Sludge buildup can cause a P0013 trouble code Sludge is caused by running the engine at low oil levels, neglecting oil changes or going too far on an oil change, poor PCV operation or using a poor quality oil. Change the oil, clear the code and drive the vehicle.
What does p0013 stand for in engine code?
Code P0013 relates to the B, or exhaust camshaft on Bank 1, which is the set of cylinders on one side of an engine that contains cylinder #1. The function of variable valve timing is to enable engines to develop more torque under different operating conditions.
What does trouble code p0011 on an intake mean?
The camshaft (s) is (are) adjusted by the ECM through the use of an oil control valve (s) (OCV) also called variable valve timing control solenoid valves. When trouble code P0011 is set, it means that the intake camshaft in Bank 1 is more advanced than the ECM has told it to be. What Are The Symptoms Of Code P0011?
What does DTC p0013 stand for in PCM?
The PCM has the ability to monitor the functionality of the high control and the low reference circuit. If the PCM detects an open, a short to ground, or a short to voltage, DTC P0013 sets. The “B” camshaft refers to the exhaust, right, or rear camshaft (looking at the engine from the drivers seat).
What does the code p0113 on the intake air temperature sensor mean?
Error Code P0113: Intake Air Temperature Circuit High Input. Error code P0113 indicates that the computer has received a high voltage signal from the intake air temperature sensor. This code will occur when the powertrain control module (PCM) receives a voltage of 5 volts or more from the IAT. This indicates a problem between the IAT and the PCM.