How do I know if I have a d16y8 head?

How do I know if I have a d16y8 head?

d16y8 head has the lost motion pointed at a little angle. there is a little opening in the y8 head….on the exhaust side if you look in the valve area….the z6 doesn’t have this.

What is a mini-me swap?

The Mini-Me is a VTEC head swap for the 88-00 Honda D-series motors. It involves taking a SOHC VTEC D-series head and attaching it to a Non-VTEC block. There are only two different D-series VTEC heads that are used for this swap. The other 1.5L blocks use a shorter 134mm rod.

What do I need for a mini me swap?

For a Z6 mini-me swap you’ll need four basic things: a D16Z6 cylinder head (including valve cover, distributor, spark plugs, spark plug wires etc), D16Z6 timing belt, D16Y8 head gasket (D16Z6 works well also, but Y8 is a better, metal gasket) and P28 ECU (make sure you get an auto ECU for an auto, manual for manual).

When to use head swapping in Photoshop?

Head swapping doesn’t work for every photo, and it always works best for photos taken one right after the other, with all the people positioned almost the same. It never hurts to give it a try, and the more you practice, the better you will get at making it look natural, and working quickly.

Which is better Y8 intake manifold or Z6 exhaust manifold?

You would want the y8 intake manifold and the z6 exhaust manifold if you were to stay with stock parts. Y8 head is built for more low end torque with swirl ports, z6 is made for high end horsepower with tumble ports. Y8 has more quench than the z6 but the z6 also has a larger combustion chamber and lower compression.

What’s the difference between a Z6 and a Y8?

Y8 head is built for more low end torque with swirl ports, z6 is made for high end horsepower with tumble ports. Y8 has more quench than the z6 but the z6 also has a larger combustion chamber and lower compression. Y8 pumps explode, z6 pumps are solid.

Who are Y8 games and what do they do?

Y8 Games is a game publisher and game developer. The Y8 platform has a social network of 30 million players and growing. The website also has videos to watch like cartoons, gameplay videos, and game walkthroughs.

How do I know if I have a D16Y8 head?

How do I know if I have a D16Y8 head?

d16y8 head has the lost motion pointed at a little angle. there is a little opening in the y8 head….on the exhaust side if you look in the valve area….the z6 doesn’t have this.

Can you put a D16Y8 head on a D16Y7?

Re: Can i put a d16y8 vtec head on a d16y7 (honda616) You can reuse the old exhaust manifold if you want but you’ll want the Y8’s intake manifold to run the two wire IACV. If you do use the Y8’s exhaust manifold you’ll have to extend the O2 wires.

Can you put a Y8 head on a Y7 block?

RE: Y8 head on Y7 block? Along with the added 20-30 hp you get, the swap will boost your compression. Get the y8 gasket and remove the center piece for a little bit of added compression. Your going to need head bolts, and you should do the valve cover and intake manifold gasket as well.

What size motor is a D16Y7?

The Honda D16Y7 is a 1.6L, inline 4-cylinder engine that was produced from 1996 to 2000 for use in the Honda Civic and Del Sol.

Is Y8 A vtec?

the y8 has vtec but it is wildly overrated on the sohc platforms. it was mostly designed to improve fuel economy and still have punch in the higher RPMs above crossover.

Can you put a vtec head on a D16Y7?

Registered. it can be a D16y7 (which is not 1.5) and put a z6 or y8 vtec head.

Which is better a Y8 or a D16Y7?

– Let the vtec selenoid in place, but let it unplugged. – y8 square combustion chamber matched with dished or flat top piston make good quench pad to prevent detonation and make the falme concentrate to the center, so better for rings, less detonation and pre-ignition. – y7 mecanic has less parts so by the way it’s easier.

What to do with a Honda D16Y7 Mini-Me?

I would switch to OBD1 now if thats the case.. buy a Chipped P28 Ecu and when you get the Y8 head put on have it tuned or learn to tune yourself. Your gonna have to do this anyways if you go turbo. Do you have a picture of the oil cap you are talking about? I have never read anything about it. Click to expand… Click to expand…

Is the oil port in the head of a Y8 Mini-Me?

Y8 vtec head Y7 valve train. Ive read the oil port is in the head on a 96-newer motor so no need to worry about it. Anyway heres my head.

Why are Y8 Springs better than D16Y7 Springs?

– y7 cam shaft (regrind is much better. – two set of y8 intake springs (red ones) because intake side is the vtec side on sohc, and springs are stiffer, so why not using two sets at both intake and exhaust ? I reved over 8000rpm with my turbo and never get valve float…