How do I reset my ap9617?
you need to push the reset button, the status LED will flash rapidly. When that happens, you need to push the reset button a second time, where then the LED will go off. at that time, go to your serial connection in hyperterminal and keep pressing enter until presented with a username and password prompt.
How do I reset my NMC?
Press and hold the NMC’s pinhole reset button for 20+ seconds, ensuring the NMC’s status LED is pulsing green during this time. When it changes to amber or orange, release the reset button to let the format function complete and for the NMC to complete its reboot process.
How do I reset my APC to factory settings?
Locate the APC network management interface on the back of your APC UPS. Press the reset button for 20 seconds. Wait for the network led change to the orange color. The APC UPS network management interface will reset its configuration back to the factory default.
How do I reset my APC login?
Press the Reset button on the back of the card. The Status LED will flash alternately orange and green. Press the Reset button a second time immediately while the LED is flashing to reset the user name and password to their defaults temporarily.
How do I reset my network management card 2?
How do I reset my backup battery?
Follow this easy procedure to brain dead the Back-UPS:
- Disconnect any attached load. (
- Unplug the UPS from the wall socket.
- Disconnect the UPS’ internal battery. (
- Push and hold the “On” button on the UPS for 5 seconds (you might hear a click, chirp or lights will blink)
- Reconnect internal battery.
What is the default username and password for APC UPS?
The default user name and password are both apc. A Device User has read and write access to device-related screens. Administrative functions like session management under the Security menu and Firewall under Logs are greyed out. The default user name is device, and the default password is apc.
How do you reset an APC 9617 card?
From the documentation for the AP9617 card, 5. Press the Reset button. The Status LED will flash alternately orange and green. Press the Reset button a second time immediately while the LED is flashing to reset the user name and password to their defaults temporarily. 6.
What are features of APC network management card AP9617?
The front-panel features of the Network Management Card (AP9617) include Status LEDs, a Reset button, and a 10/100Base-T connector. Resets the Management Card while power remains on. Connects the Management Card to the Ethernet network. See Link-RX/TX (10/100) LED.
How do I Reset my APC username and password?
So follow the procedure to reset the username/password, login with the “apc”/“apc” combo, and the use the menu’s of the Serial console to permanently assign your chosen administrator username and password.