How do you change the light bulb on a Suzuki?
Center Interior Light (if equipped) Pull down the lens by using a plain screw driver covered with a soft cloth as shown. To install it, simply push it back in. The bulb can be removed by simply pulling it out. When replacing the bulb, make sure that the contact springs are holding the bulb securely. Rear Interior Light (if equipped)
How do you replace a parking light bulb?
To remove and install a full glass type bulb (1), simply pull out or push in the bulb. To remove a glass metal type bulb (2) from a bulb holder, push in the bulb and turn it counterclockwise. To install a new bulb, push it in and turn it clockwise. You can access the individual bulb or bulb holders as follows. Parking/Turn signal light
When to replace headlight bulbs on Suzuki Vitara?
Suzuki Grand Vitara/ Suzuki Grand Vitara Owners Manual/ Inspection and Maintenance/ Bulb Replacement WARNING: • Light bulbs can be hot enough to burn your finger right after being turned off. This is true especially for halogen headlight bulbs. Replace the bulbs after they become cool enough.
How do you replace a glass light bulb?
There are two types of bulb, “Full glass type” (1) and “Glass/metal type” (2). To remove and install a full glass type bulb (1), simply pull out or push in the bulb. To remove a glass metal type bulb (2) from a bulb holder, push in the bulb and turn it counterclockwise. To install a new bulb, push it in and turn it clockwise.
How do you replace a spot light bulb?
Pull down the lens by using a plain screw driver covered with a soft cloth as shown. To install it, simply push it back in. The bulb can be removed by simply pulling it out. Spot Light (if equipped) Pull down the lens by using a plain screw driver covered with a soft cloth as shown. Ceiling-mount type (if equipped)
How do you replace a halogen headlamp bulb?
Low beam (Halogen headlamp) Open the engine hood. Disconnect the coupler. Remove the sealing rubber. Push the retaining spring forward and unhook it. Then remove the bulb. Install a new bulb in the reverse order of removal. High beam Open the engine hood. Disconnect the coupler while pushing the lock release.