How do you remove a seat from a Toyota?
Remove the plastic covers at the bottom of the seat by hand to expose the seat bolts. Unbolt the rear of the seat using the 3/8-inch ratchet and socket. Slide the seat to its farthest back position. Remove the front seat bolts, underneath the very front edge of the seat, using an open-end wrench or a 3/8-inch ratchet and socket.
How do you unbolt the back of a car seat?
Unbolt the rear of the seat using the 3/8-inch ratchet and socket. Slide the seat to its farthest back position. Remove the front seat bolts, underneath the very front edge of the seat, using an open-end wrench or a 3/8-inch ratchet and socket. Tilt the top of the seat forward using the seat adjuster on the outside of the seat.
How do you remove a power seat cover?
Remove the 2 front seatback cover No. 2 hog rings under the seat. Using a screwdriver, remove the 2 reclining power seat switch knobs. HINT: Tape the screwdriver tip before use.
How do you remove the front seat cover on a Toyota Camry?
Disengage the hook, and remove the seat cushion cover together with the pad. Remove the hog rings and seat cushion cover. a. Cut off the tack pins which fasten the seat heater, and then remove the front seat heater from the seat cushion cover. NOTICE: Be careful not to damage the seat cushion cover. 12. REMOVE FRONT SEATBACK COVER
How to disassemble a Toyota Sienna front seat?
Using a screwdriver, disengage the claws and remove the seat side table leg cover. HINT: Tape the screwdriver tip before use. 2. REMOVE FRONT SEAT SIDE TABLE (w/ Table) Remove the 4 nuts and seat side table. Remove the 2 clips and seat side table cover. 3. REMOVE OCCUPANT CLASSIFICATION ECU (for Front Passenger Seat) 4.
Can a Toyota Camry seat be reupholstered?
You can install a new set of seat covers, but to really restore the seats, you need to take them out and have them reupholstered completely. In this case, the project vehicle is a 2003 Toyota Camry, but the process is similar for other Toyota vehicles as well.