How do you reset the dashboard on a Toyota Camry?
Push and hold the dashboard odometer button and turn the key to position two. Keep holding the odometer button until the maintenance light starts to flash. You might even hear beeping noises. The light should go out.
How do you reset the dash light on a Toyota Corolla?
Quickly push and hold the odometer button on your dashboard, then turn your key to position two. Continue to hold the odometer buttonfor around 10 seconds. The maintenance light should begin to flash, and you may hear a beeping. Then the light should go out.
When does the warning light turn off on a Toyota?
If the front passenger’s seat is occupied, the front passenger’s seat belt also needs to be fastened to make the warning light (warning buzzer) turn off. The indicator light flashes after the ENGINE START STOP switch has been turned off to indicate that the system is operating.
What do the yellow and red symbols mean on a Toyota dashboard?
Yellow icons indicate an item of importance (such as low fuel), but are not necessarily a warning. Red icons indicate a condition that requires immediate attention, such as an open door or low engine oil pressure. See your vehicle’s Owner’s Manual for more details. Countless.
Where are the lights on the dashboard located?
Most vehicles have a dashboard lights control switch that will dim the dashboard lights, as well as turn them off. Check the control switch, which should be located on the console near the steering column or part of the headlight switch. Tail lights and dash lights are connected through the tail light (and/or brake light) fuse.
What does the slip indicator light mean on a Toyota?
If the vehicle is in danger of slipping or if any of the drive wheels spins, the slip indicator light flashes to indicate that the VSC/TRAC systems are operating. Depending on the vehicle, a buzzer (intermittent) may sound to indicate that VSC is operating. Your vehicle is equipped with a front passenger occupant classification system.