How is the fault code of a Hino truck determined?

How is the fault code of a Hino truck determined?

5. The malfunction code is determined by the series of outbreaks “tens-units” of the warning lamp. 6. For example, the lamp flashes 1 time, then a pause of 1.5 seconds, then flashes 3 times. This means code 13. 7. If two or more fault codes are stored in the memory of the electronic unit, the codes will be separated by a pause of 2.5 seconds.

What to do if you get a p1227 code?

Start by checking the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. The cost to diagnose the P1227 code is 1.0 hour of labor.

What is the p code on a Hino j05d?

There is a possibility that the flow damper is operat- ing. “In case that the NE and G sensor have malfunctions, this P code will be output.” The pulse from the crankshaft position sensor can- not be detected. There are possibilities of the sensor and harness malfunctions.

When does the throttle position sensor display a low voltage?

Code P0122 gets logged when the throttle position sensor “A” displays lower voltage than normal. Several OBD-II trouble codes also cover the performance of the throttle position sensor at the “A” position. They are:

When is there no Ne signal on a Hino truck?

There is no “NE” signal to the electronic control unit for 2 seconds or more when the crankshaft is cranked by the starter. 1. Open or short circuit in the sensor circuit of the shaft speed sensor pump.

Where can I find a Hino service manual?

For General Information or Technical Assistance regarding your Hino Truck, please contact your local Certified Hino Dealer. If you need an Owner’s / Driver’s Manual or a Service Repair Manual, please visit the online Publications page . For all other General concerns, email us at: [email protected]

What kind of engine does a Hino truck have?

Trucks have a 100 kW diesel engine. (134 hp), with a torque of 353 Nm. Electric motor 36 kW, with a torque of 350 Nm. Nickel-metal hydride (NiMH) batteries 228 V. Fuel consumption is about 10 l / 100 km. Carrying capacity 2-4 tons. In 2006, about 1,000 Dutro Hybrids were sold in Japan.