How much does it cost to replace oil cooler on GMC Sierra 1500?
GMC Sierra 1500 Oil Cooler Lines Replacement costs $214 on average. What are the Oil Cooler Lines all about? You won’t find oil cooler lines on all engines. They’re more prominent on supercharged and turbocharged engines, as well as on larger engines that require extra oil cooling, such as older full-sized SUVs.
How are oil cooler lines installed in a GMC Sierra?
The new oil cooler lines are installed to the oil filter housing and secured with new clamps. The two oil cooler lines are connected and secured with new clamps to the oil cooler. The vehicle is started and checked for oil leaks then lowered off of the jack stands. The oil level is checked and topped off with the correct oil.
Do you need to replace the oil cooler?
Some lines are actually connected to the fittings, so replacement is mandatory. If the lines go to an oil cooler, it may be necessary to replace the oil cooler as well, particularly if the damage is due to debris buildup. The vehicle is allowed to cool. The vehicle is raised and secured on jack stands.
Is the oil cooler block off plate still leaking?
Drove it around 80 miles or so, just checked it again and it still leaks. The block off plate has no cracks in it, and I even ran some 400 grit sand paper over it to make sure it was level as well as running a flat piece of aluminum over it, and it looks perfect.
GMC Sierra 1500 Oil Cooler Lines Replacement costs $214 on average. What are the Oil Cooler Lines all about? You won’t find oil cooler lines on all engines. They’re more prominent on supercharged and turbocharged engines, as well as on larger engines that require extra oil cooling, such as older full-sized SUVs.
The new oil cooler lines are installed to the oil filter housing and secured with new clamps. The two oil cooler lines are connected and secured with new clamps to the oil cooler. The vehicle is started and checked for oil leaks then lowered off of the jack stands. The oil level is checked and topped off with the correct oil.
Do you need an engine oil cooler for a Silverado?
I added an engine oil cooler to a new 34 in. Silla all-aluminum radiator with both trans oil and engine oil inlet / outlets. Two lines, gasket, engine block bolt, two line connectors, and radiator shroud clip is needed. Check Compnine.com for diagram, look up 99-00 2500 3/4 ton non HD.
Are there oil cooler lines on all engines?
You won’t find oil cooler lines on all engines. They’re more prominent on supercharged and turbocharged engines, as well as on larger engines that require extra oil cooling, such as older full-sized SUVs.