How much transmission fluid does a 2008 GMC Sierra take?

How much transmission fluid does a 2008 GMC Sierra take?

The 2008 GMC Sierra transmission fluid type is Dexron ViATF stated by the manufacturer. If You are changing Your transmission fluid You will need 6 quarts. If You don’t change the transmission fluid on schedule, You’ll be lubricating Your transmission with metal shavings and other contaminants.

How much oil does a 2008 GMC 1500 take?

6 quarts
Capacity: 6 quarts. (with filter)After refill check oil level.

What’s the name of the GM 6.2 liter V8?

Displacing 6.2 liters in a V8 configuration, the L94 was part of the Vortec (Generation IV Small Block) engine family, which was replaced by the Ecotec3 (Generation V Small Block) engine family. The L94 was specifically replaced by the new 6.2-liter EcoTec3 L86.

What are the strengths of the GMC Sierra 1500?

Model strengths: Tough enough for work duty, smooth enough for daily driving; available luxury features; towing capability. The GMC Sierra 1500, which was completely redesigned a year ago, sees little variation for the 2008 model year. The 2008 GMC Sierra 1500 is a half-ton pickup for those who really work their truck.

How often does the GMC Sierra come out?

Their four generations have appeared every five to seven years: 1999 to 2007, 2007 to 2014, 2014 to 2019, and 2019 to the present. Here’s a look at some of the most common problems the GMC Sierra has had over the years.

Displacing 6.2 liters in a V8 configuration, the L94 was part of the Vortec (Generation IV Small Block) engine family, which was replaced by the Ecotec3 (Generation V Small Block) engine family. The L94 was specifically replaced by the new 6.2-liter EcoTec3 L86.

What are the trim levels of a 2008 GMC Sierra 1500?

The 2008 GMC Sierra 1500 is offered in five trim levels from basic to sinfully luxurious. The base model is the WT (work truck), and then, ascending the food chain, the SLE, SLE2, SLT and Denali.

When was the GMC EcoTec3 6.2L engine replaced?

In 1994, the 6.2L was replaced by the 6.5L. This engine was then subsequently replaced by the Duramax 6600 back in 2001. While the 6.2L engines have been out of for about a decade now, you can certainly find a great amount of them on the roads.

Are there any problems with the GMC 6.2 engine?

GMC 6.2 Engine Problems- Engine Failure One owner of a 2014 Denali reported engine failure with his 6.2 engine. While the owner said that the Denali owned offered plenty of torque for towing a 20 ft car trailer, it used virtually no oil. The owner then reported one day while traveling in the 2014 Denali, the engine began to misfire.