How to reset Honda Civic oil service maintenance light?

How to reset Honda Civic oil service maintenance light?

Close all doors, gear to the park position. Make sure the ignition is off. Press and hold the TRIP button and don’t release. While pressing and holding the TRIP butto n, turn the ignition to ON position, c ontinue to hold and press the TRIP button until the MAINTENANCE REQUIRED light disappears.

When does the Honda Civic maint REQ’D light go off?

After 10 seconds, the MAINT REQ’D light will reset and turn off. The MAINT REQ’D light is designed to illuminate (whenever the engine is running) after 10, 000 miles. After the MAINT REQ’D light is reset, it will illuminate when the ignition switch is turned on then will go out after 2 seconds.

How to reset maintenance required light ( 2001-2005 )?

If the lights are on, the MAINT REQ’D light will not reset. If your Civic is equipped with daytime running lights (DRL), the DRL must be disabled so the MAINT REQ’D light can be reset. These are the steps: Turn the ignition switch to the OFF position.

Where is the reset button on a Honda Civic?

Press and hold the SELECT/RESET button. NOTE: See bottom photo for location of the SELECT/RESET button. While holding the button down, turn the ignition switch to the ON position (but without cranking or starting the engine). Hold the SELECT/RESET button for about 10 seconds.

How do I reset maintenance light?

Turn your vehicle’s ignition to the “acc” setting while holding the button. Do not crank the vehicle. Hold the position for five seconds and turn the ignition key off. Release the button. The maintenance light will be reset and will illuminate again the next time service is due.

How do I Turn Off the maintenance required light on my Honda?

How to Turn Off the Maintenance Required Light on a Honda Civic. Put the key in the ignition. Press and hold the odometer reset knob. This is the knob that sticks out on the bottom right of the instrument cluster. While holding this button, turn the key to the “On” position, but do not start the engine.

What does the service code B1 mean on a Honda Civic?

The “B” represents an oil and filter change plus mechanical inspection, while the “1” means it’s time to have the vehicle’s tires rotated. When the Maintenance Minder system indicates that your fit needs B1 service, the service should include the following inspections, according to the Honda Fit ’s owner’s manual:…

What does the maintenance required light mean on my car?

This is an alert for you to make an appointment for car service because you are getting close to the 5,000-mile service interval. The maintenance required light will remain on and be solid after the mileage interval reaches 5,000 miles since the light was reset. This is the final reminder to bring your car in for service.