How to set the engine on a Mercedes Benz W124?
With the fan and shroud removed (we also removed the belt) place a 27mm socket on a large breaker bar and turn the crank clockwise (red arrow). Note: the radiator is removed in this picture but you do not need to remove it for this job.
What kind of engine does a 1995 Chevy E280 have?
1994 E280, E320(2.8L and 3.2L M104 engines) – sedan, coupe, cabriolet, and wagon 1995 E280, E320(2.8L and 3.2L M104 engines) – sedan, coupe, cabriolet, and wagon The chassis covered are: 124.028(Sedan with 2.8L, M104.942 engine) 124.032(Sedan with 3.2L, M104.992 engine) 124.052(Coupe with 3.2L, M104.992 engine)
Where can I find the DM code on my W124?
DM codes can be read using the built-in pushbutton & LED at the 8-pin connector in front of the CAN box, near the 38-pin connector. ONLY codes from the DM will show using the built-in LED, you cannot read codes from the HFM-SFI, EA/CC/ISC, SRS, etc from this LED.
What is the control module on a W124?
The ABS control module is N30. Models withASR have an EA/CC/ISC (Electronic Accelerator / Cruise Control / Idle Speed Control) module, N4/1, which controls the EA/CC/ISC actuator (M16/1). The ABS/ASR control module is N30/1.
With the fan and shroud removed (we also removed the belt) place a 27mm socket on a large breaker bar and turn the crank clockwise (red arrow). Note: the radiator is removed in this picture but you do not need to remove it for this job.
What causes timing chain problems in Mercedes Benz?
Mercedes-Benz V6 and V8 engines had timing chain problems caused by balance shaft and idler gear failures. Mercedes produced certain models with defective gears in their balance shafts (M272 engines) or with defective idle gears (M273 engines).
DM codes can be read using the built-in pushbutton & LED at the 8-pin connector in front of the CAN box, near the 38-pin connector. ONLY codes from the DM will show using the built-in LED, you cannot read codes from the HFM-SFI, EA/CC/ISC, SRS, etc from this LED.