How to wire a Lambretta 12V ignition kit?
Flywheel, Stator Plate, Regulator, CDI Unit, Earth Wire, and instructions. the original weights of each of the flywheels fitted to Italian Innocenti Lambretta’s. . The 12V regulator has 3 terminals; connect the yellow wire from the stator . Follow the Electronic Ignition wiring diagram as supplied with the electronic ignition kit.
Where is the 12V regulator on a lambretta scooter?
With complete AC systems you simply have to plug the AC to the wires that lead the main loom. 12V regulator earth wire to frame: Rear light earth wire: Fitted to all Lambretta scooters, connects into the rear light bulb holder and is earthed to the frame.
How to change the battery on a Lambretta?
These are the official Casa Lambretta wiring diagrams for fitting a Casatronic ignition, for most Lambretta wir. There are two ways to use a battery, if your scooter is a battery model already, you will already have battery switches / igntiions in place, so simply change the bulbs, battery and horn to 12v items and follow diagram 2.
Why is my ignition not working on my Lambretta?
Any ignition system would have to be in tiptop condition to stay working on a tuned motor. These systems when working could be fine on a standard engine, but lack power in the lighting department, this can effect the ignition system and cause problems with firing of the plug when the lights are on!
Flywheel, Stator Plate, Regulator, CDI Unit, Earth Wire, and instructions. the original weights of each of the flywheels fitted to Italian Innocenti Lambretta’s. . The 12V regulator has 3 terminals; connect the yellow wire from the stator . Follow the Electronic Ignition wiring diagram as supplied with the electronic ignition kit.
What kind of light does a Lambretta use?
LED Lighting: One problem encountered with non-battery Lambretta’s is that of the headlight dimming when the brake is applied. A way round this is to fit an LED bulb in place of the standard stop/tail rear bulb.
How does a tail light switch work on a Lambretta?
The switch is designed with a small gap between the brass strips of the dip and main beam contacts so momentarily both the dip and head beams are on in the switchover position. This is to prevent a surge of power to the tail light which can blow the rear bulb.
Where does the yellow wire come from on a Lambretta?
3. Yellow is for the pilot light, can also be called side light or city light! The yellow wire also comes from the light switch. 4. White This is for earth, on all original Lambrettas the earth wire will be attached to the headlight rim.