What are the fault codes for Freightliner M2?

What are the fault codes for Freightliner M2?

Freightliner Business Class M2 Fault Codes List -… * On March 7, 1997. If there is no text message, the display area will be blank. Only the MID number will display. * On March 7, 1997. * On March 7, 1997. * On March 7, 1997. 154 Auxiliary IN / OUT Status # 2 AUX INP / OUTP # 2 Aux. In / Out # 2

When did the mid code go out for Freightliner?

* On March 7, 1997. If there is no text message, the display area will be blank. Only the MID number will display. * On March 7, 1997. * On March 7, 1997. * On March 7, 1997. 154 Auxiliary IN / OUT Status # 2 AUX INP / OUTP # 2 Aux. In / Out # 2 155 Auxiliary IN / OUT status # 1 AUX IN / OUT # 1 Aux.

Which is the SID number for Freightliner 7?

Only the SID number will display. 7 ABS modulator, 1st Axis, Left (front) PRSMOD VLV A1L Mod. Valve a1l 8 ABS Modulator, 1st Axis, Right (front) PRSMOD VLV A1R Mod. Valve a1r 9 ABS modulator, 2nd Axis, Left (middle) PRSMOD VLV A2L Mod.

Which is ABS modulator does Freightliner A2R 11 use?

Valve a2r 11 ABS modulator, 3rd Axis, Left (rear) PRSMOD VLV A3L Mod. Valve a3l 12 ABS Modulator, 3rd Axis, Right (Rear) PRSMOD VLV A3R Mod.

Multifunction Turn Signal Switch Disagreement–Both wiper high and wiper low inputs are on. Unknown Keep Awake Fault–Modules are kept awake. Headlamp Switch Disagreement–Both park and on inputs are closed.

What are the fault codes for the bulkhead module?

J1587 SIDs for Bulkhead Module (BHM) MID 164 SID Description Possible FMI 000 Backlighting Dimmer Switch Fault 7 001 Clutch Switch Fault 7 002 Reserved for Future Use — 003 Headlamp Switch Disagreement–Both park a 7

When does an ECM log an inactive fault?

If values rise above or below expected, the ECM will log a code. If the error has occurred but is not happening at the time of diagnostics, it is known as an Inactive Fault.

What does it mean when your fault code is active?

If the error is happening while you diagnose, it is known as an Active Fault. All codes can be classified as either Active or Inactive, and their status can be determined by flash codes or through the Insite Electronic Service Tool. Due to new OBD2 compliance, codes no longer have to be active or inactive.

What does Technical Service Bulletin 3749 mean for Cummins?

Summary: This Technical Service Bulletin describes the verification and resolution of fault code 3749 with no other diesel exhaust fluid (DEF) system related fault codes. This is due to a potentially frozen aftertreatment DEF tank at colder ambient

What is the aft code for a Cummins Engine?

Due to a software issue, Fault Code 3714, 3712, 6255, and 6254 may become active aft Summary: This Technical Service Bulletin describes the verification and resolution of certain malfunctions due to incorrect switch input wiring on some engines.

Are there certified repair locations for Cummins ISB6.7 engines?

Summary: This field action authorizes certified repair locations to address potential concerns with coolant level sensors installed in certain ISB6.7 CM2350 B101, MY 2013 and 2014 engines. This In-Shop Campaign authorizes certified repair locations

How many hours does a Freightliner engine work?

185 Average Fuel Consumption AVG FUEL ECON AVG. Fuel econ 239 Vehicle Position (GPS) by VEHICLE POS Veh. Position 246 Total Working Hours Machine TOTAL VEH HRS Total Veh Hrs. 247 Total Engine Hours TOTAL ENG HRS Total ENG Hrs. 248 Total Power Pickup Hours TOTAL PTO HRS Total PTO Hrs. * On March 7, 1997.

What is the SPN code for the fuel filter?

SPN Code: SPN Name: SPN Description: 16: Engine Fuel Filter Differential Pressure (see also SPN 1382) Differential pressure measured across the fuel filter located between the fuel tank and the supply pump. See SPN 1382 and Figures SPN16_A & SPN16_B. 18: Engine Fuel Pressure (Extended Range) 19: Engine Oil Pressure (Extended Range) 20

What does FMI stand for in failure mode?

•“FMI” is the Failure Mode Indicator. This number represents the type of failure detected. Refer to Failure Mode Indicators (FMI) below for more information. 2 BODY CONTROLLER DIAGNOSTIC TROUBLE CODES (S08327) FAILURE MODE INDICATORS (FMI) DEFINITIONS

What is the SPN for parking brake not set?

Parking Brake Switch Switch signal which indicates when the parking brake is set. In general the switch actuated by the operator’s park brake control, whether a pedal, lever or other control mechanism (see also SPN 619 and 5275).00b = Parking brake not set 01b = Parking brake set 10b = Error 11b = Not available 72

What is the oil temp on a Freightliner?

TRAN OIL TEMP Oil TEMP 178 Front Axle Load FRONT AXLE WT Front Axle Wt. 179 Rear Axle Load REAR AXLE WT Rear Axle Wt. * On March 7, 1997. 185 Average Fuel Consumption AVG FUEL ECON AVG.

What makes a Freightliner M2 106 vocational truck?

Constructed from high quality and durable materials, the M2 106 cab is lightweight yet extremely tough, made from corrosion-resistant aluminum reinforced with with e-coated steel. Freightliner Trucks uses robotics and other automated systems to help produce precise, reliable, world-class vocational trucks.

What are the safety systems on Freightliner Trucks?

The suite of active and passive safety systems on Freightliner ® trucks can help drivers mitigate risk. Among the available active systems is the Meritor WABCO OnGuard and OnLane, which provide collision mitigation and lane departure warning.

What does the dashboard say on a Freightliner M2 cat C7?

Freightliner M2 Cat C7 engine. Dashboard says 3_2.2 and after bh164 code. Can somebody tell me what that meens? Freightliner M2 Cat C7 engine. Dashboard says 3_2.2 and after… I have a 2006 Freightliner M2 Cat C7. I had an oil leak and I have a 2006 Freightliner M2 Cat C7. I had an oil leak and could not find the actual leak.

How to tell if a Freightliner chassis is dead?

Freightliner Chassis Dead No Power, Wont Start! Hi, Folks. I am stuck here in the Easton MD area. My Journey 2002, Freightliner CCC, *** ISB 8.3, Allison 2000, pulled up to a stop light and without warning stalled, dead. The engine stopped like the key was turned off. No dash lights, no head lights, nothing that I can find on the chassis has power.

What should I do if my ECU light comes back on?

Drive the car for at least 10 miles for the ecu to learn, if there is a problem with your vehicle then the check engine light will come back on and you can analyze the fault code that the ECM throws. These codes will guide you towards the root of the problem and you can begin replacing parts to try to fix the issue.

What kind of engine does a Freightliner have?

My Journey 2002, Freightliner CCC, *** ISB 8.3, Allison 2000, pulled up to a stop light and without warning stalled, dead. The engine stopped like the key was turned off. No dash lights, no head lights, nothing that I can find on the chassis has power. Tried to switch my house batteries over to start engine, no luck, not even a light on the dash.

Where is the intake heater on a Freightliner?

It **might** have an intake heater. It would be on the air intake pipe going in to the engine and have a couple of 2 gauge or so cables gojng to it. either way that shouldn’t make a difference to starting at this time of year.

What makes a Freightliner engine hard to start?

It’s probably not an injector, but fuel loss from one of the high pressure pipes can make them hard to start. look for fuel leaks on the driver’s side of the engine.

What is the low coolant level sensor on a Cummins m2?

General Information The three-wire low coolant level sensor (CAS 700685 001) on some M2 vehicles built from 2007 to October 8, 2009, with Cummins ISB and ISC engines, may develop an internal leak, causing the engine light to illuminate and the engine to shut down.

Where can I find the Mercedes Fault code?

Any of the scanners listed above can read and clear the Check Engine / Service Engine Fault Codes. The codes above are retrieved by plugging a diagnostic scanner into the OBD-II port located under the dash, and scanning for fault codes. Location of OBD II port used to retrieve Mercedes-Benz fault codes.

What are the maintenance schedules for a m2 truck?

Maintenance Schedules: 00–02 Maintenance Intervals for Schedule I: 00–03 Maintenance Intervals for Schedules II and III: 00–04 Overview of Maintenance Operations: 00–05 Initial Maintenance (IM) Operations: 00–06 M1 Maintenance Operations: 00–07 M2 Maintenance Operations: 00–08 M3 Maintenance Operations: 00–09