What are the specs for ring and pinion?

What are the specs for ring and pinion?

Ring and Pinion Gear Set Up Specs – Torque and Backlash Crawlpedia is an off-road encyclopedia featuring a complete list of proper ring and pinion gear set up torque and backlash specs. [ CRAWLpedia ]

How to set up ring and pinion gear?

Ring and Pinion Gear Set Up To install your ring and pinion gears and/or differential correctly, it is critical to torque your bolts and set your preload and backlash correctly. The following table contains the proper specifications for all popular axles.

How to do ring and pinion change on Silverado Sierra?

Step 22: Use large pipe wrench and clamp onto yolk where drive shaft came off of and then break the pinion nut loose. The pinion nut was a 1 ¼ on my truck. Step 23: Take nut off and pull off yolk. Both are in the picture. Step 24: Put nut back on and use the sledge hammer to knock the pinion out.

How do you mount a pinion ring on a Ford?

Install the front bearing and carefully tap the pinion seal in place with a properly sized seal driver or an old race. West Coast Differentials notes that Ford 8- and 9-in., and GM 10.5- and 12.25-in. ring gears use a pilot bearing that must be tapped in, with a retainer for the Fords. Mount the ring gear to 30 October 2015

Ring and Pinion Gear Set Up To install your ring and pinion gears and/or differential correctly, it is critical to torque your bolts and set your preload and backlash correctly. The following table contains the proper specifications for all popular axles.

Ring and Pinion Gear Set Up Specs – Torque and Backlash Crawlpedia is an off-road encyclopedia featuring a complete list of proper ring and pinion gear set up torque and backlash specs. [ CRAWLpedia ]

Step 22: Use large pipe wrench and clamp onto yolk where drive shaft came off of and then break the pinion nut loose. The pinion nut was a 1 ¼ on my truck. Step 23: Take nut off and pull off yolk. Both are in the picture. Step 24: Put nut back on and use the sledge hammer to knock the pinion out.

How big is the torque cap on a pinion?

Pinion Preload (Reused) Ring Gear Backlash Ring Gear Bolt Torque Carrier Bearing Cap Bolts Chrysler 7.25″ 12 to 14 in-lbs. 6 to 7 in-lbs. .006″ to .010″ 55 ft-lbs.