What does a p0357 code on a car mean?
When the P0357 code is stored, it means that the PCM has detected one or more ignition coils is faulty to some degree. Most vehicles with an OBD-II system utilize a “coil on plug” (COP) method of providing the necessary ignition spark for the engine to work.
What was the problem with my GMC Yukon?
This 2007 GMC Yukon came in with multiple complaints among which were the engine seemed to have no power, the Service Engine Soon, ABS and Traction lights were on and there was a stability message displayed in the Driver’s Information Center (DIC).
Why is my p0358 ignition coil not reset?
If you find that the engine isn’t misfiring, the coil is being triggered properly but P0358 is continually being reset, there is the possibility that the PCM coil monitoring system may be faulty. Replaced ignition coils for all cylinders.
What is the p0352 code for bank two ignition coils?
Since the P0352, P0354, P0356 & P0358 codes have to deal with the coil control circuits for all of the bank two ignition coils, I started by checking the basic power and ground supplies to the bank two ignition coils. There was no problem with the voltage signal on the red wires at the harness terminal position “A”.
When the P0357 code is stored, it means that the PCM has detected one or more ignition coils is faulty to some degree. Most vehicles with an OBD-II system utilize a “coil on plug” (COP) method of providing the necessary ignition spark for the engine to work.
This 2007 GMC Yukon came in with multiple complaints among which were the engine seemed to have no power, the Service Engine Soon, ABS and Traction lights were on and there was a stability message displayed in the Driver’s Information Center (DIC).
Can a p035x code be an ignition misfire?
In addition to an illuminated check engine light, the most common symptom is an ignition misfire. Often, P035x codes will also be accompanied by a misfire code (P0300-P0308). How do you troubleshoot code P0357 ?
Why does my p0357 ignition coil keep resetting?
If you find that the engine isn’t misfiring, the coil is being triggered properly but P0357 is continually being reset, there is the possibility that the PCM coil monitoring system may be faulty. Hi all. I have a 2002 Dodge Ram 1500 with a 4.7L V8.