What does p1443 mean on a fuel tank?
P1443 Meaning The Powertrain Control Module (PCM) monitors the fuel tank pressure. The Diagnostic Trouble Code (DTC) will set when the PCM detects a fuel tank pressure change greater than minus (-) 7 inches of water in 30 seconds occurred with a purge, fuel vapor, flow at less than 0.02 lb/min (0.15 gm/s).
What is the OBD 2 fault code p1443?
OBD II fault code P1443 is a manufacturer specific code that carmakers Ford, Lincoln, Mazda, and Mercury define as “Evaporative Emission Control System Control Valve”, and on these applications, the code is set when the PCM (Powertrain Control Module) detects a malfunction of the EVAP (Evaporative Emissions Control System)…
What causes a charcoal canister to be code p1443?
Common causes of code P1443 could include the following-. Defective charcoal canister. If the purge valve is located close to the canister, disintegrating charcoal can (and often does) enter vacuum lines, and eventually interfere with the operation of the purge valve.
Where is the p1443 purge control valve located?
However, all codes that precede P1443 must be resolved before an attempt is made to diagnose and repair P1443. Consult the manual to locate the EVAP purge control valve, as well as all associated wiring, hoses, and connectors.
P1443 Meaning The Powertrain Control Module (PCM) monitors the fuel tank pressure. The Diagnostic Trouble Code (DTC) will set when the PCM detects a fuel tank pressure change greater than minus (-) 7 inches of water in 30 seconds occurred with a purge, fuel vapor, flow at less than 0.02 lb/min (0.15 gm/s).
OBD II fault code P1443 is a manufacturer specific code that carmakers Ford, Lincoln, Mazda, and Mercury define as “Evaporative Emission Control System Control Valve”, and on these applications, the code is set when the PCM (Powertrain Control Module) detects a malfunction of the EVAP (Evaporative Emissions Control System)…
Where is the fuel pressure sensor on a GMC diesel?
The engine control module (ECM) controls the fuel pump pressures by using two fuel pressure regulators, fuel pressure regulator 1 is located on top of the fuel injection pump and fuel pressure regulator 2 (7) is located on a fuel rail (2). The fuel pressure sensor (4) provides a voltage signal to the ECM to indicated fuel rail pressures.
Common causes of code P1443 could include the following-. Defective charcoal canister. If the purge valve is located close to the canister, disintegrating charcoal can (and often does) enter vacuum lines, and eventually interfere with the operation of the purge valve.